1) helix Bourdon tube
螺旋弹簧管
2) spiral tube
螺旋形弹簧管，盘簧管
3) coil spring
螺旋弹簧
1.
Stiffness calculation of coil spring used in locomotive and rolling stock;
机车车辆中螺旋弹簧刚度计算
2.
Non-conservative fussy reliability design of automobile coil spring
汽车螺旋弹簧的非保守模糊可靠度设计
3.
This article take the coil spring as the object of study,proposed structural style,the material,the level of stress and the fabrication technology of coil spring,which should be meet to prolong the coil spring fatigue life and improve smoothnees of the vehicle.
螺旋弹簧是高机动越野汽车悬架系统中的关键零件。
4) spiral spring
螺旋弹簧
1.
Discussion once again on the improvement method of cylindrical spiral spring design;
再谈圆柱螺旋弹簧设计方法的改进
2.
The optimal design system on CAD of spiral spring;
螺旋弹簧的计算机辅助优化设计系统
3.
Calculating rolling stock spiral spring's stiffness by method of amending spring working height
采用修正工作高度的方法计算铁道机车车辆螺旋弹簧刚度
5) Helical spring
螺旋弹簧
1.
Nonlinear theory of conical helical spring;
圆锥螺旋弹簧的非线性理论研究
2.
The reliability multi-target optimization design of helical spring;
螺旋弹簧可靠性多目标优化设计
3.
The paper is first contributed to discussing the method calculating the internal natural frequencies of helical springs.
本文首先讨论丁单螺旋弹簧局部振动的固有频率的计算方法,在此基础上进一步建立了串联、并联弹簧局部振动的分析模型,并探讨了弹簧局部振动频率的控制方法。
6) helix spring
螺旋弹簧
1.
Based on the center of gravity of cab,this paper offers the improvement ways for helix spring and shock absorber of the heavy truck cab suspension.
文章在测出某重卡驾驶室质心的基础上,对重卡驾驶室悬置系统中前、后螺旋弹簧及减振器的参数进行改进。
2.
Faced with the poor reliability of hydro-pneumatic suspension installed on off-road vehicles,a composite suspension is designed,where the elastic force is supplied by both the helix spring and hydro-pneumatic suspensions.
针对装有油气悬架的车辆在实际应用中所面临的可靠性问题,提出了一种以油气悬架和螺旋弹簧共同作用提供弹性力的复合悬架。
3.
According to[1], the longitudinal shock calculation of the helix spring in the shockproof device is discussed.
讨论了[1]中提出的汽车防撞防振器中螺旋弹簧的纵向冲击计算,同时也简单地介绍了板簧及组合圆柱形压缩螺旋弹簧的计算。
补充资料：螺旋弹簧
用弹簧钢丝绕制成的螺旋状弹簧。螺旋弹簧类型较多,按外型可分为普通圆柱螺旋弹簧和变径螺旋弹簧(见图);按螺旋线方向可分为左旋弹簧和右旋弹簧。圆柱形螺旋弹簧结构简单，制造方便，应用最广，其特性线为直线，可作压缩弹簧、拉伸弹簧和扭转弹簧。当载荷大而径向尺寸又有限制时，可将两个直径不同的压缩弹簧套在一起使用，成为组合弹簧。变径螺旋弹簧有圆锥螺旋弹簧、蜗卷螺旋弹簧和中凹形螺旋弹簧等。圆锥螺旋弹簧的缓冲性能较好，能承受较大载荷。蜗卷螺旋弹簧能储存较多能量和承受较大载荷，但制造工艺较为复杂。中凹形螺旋弹簧的性能与圆锥螺旋弹簧相似，多用于坐垫和床垫等。弹簧钢丝的载面有圆形和矩形等，以圆形截面最为常用。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条