1) glulam
['ɡlju:læm]
集成材
1.
Measures to Enhance Glulam Yields and Wood Utilization;
提高集成材出材率及木材利用率的几项措施
2.
The selection, types and characteristics of glulam adhesives are briefly introduced , and the development trend is also prospected.
本文简单介绍了集成材胶粘剂的选择、种类和特点,并探讨了集成材用胶粘剂的发展趋势。
3.
The selection,types and characteristics of structural glulam adhesive are introduced.
介绍结构集成材用胶粘剂的选择、种类和特点,并展望结构集成材用胶粘剂的发展趋势。
2) glued laminated timber
集成材
1.
Study on high property water-based isocyanate adhesives for glued laminated timber;
高性能集成材拼板胶的研制
2.
The characters,bonding mechanism,parameters control in glued laminated timber and final test method of EPI adhesives are introduced.
介绍了木材用EPI胶黏剂的特点、粘接机理、在集成材应用中使用的参数控制以及最终检验方法。
3) laminated wood
集成材
1.
Study on the demand of drying quality for laminated wood make up a feasible drying standard workman ship controlling procedure.
研究了集成材胶接对干燥质量的要求，制定了可行的干燥基准，工艺控制过程，并且对于不同的树种，对干燥工艺的要求进行了比较，提出了与常规干燥工艺，特别是林业行业标准《锯材窑干工艺规程》不同之处。
4) finger jointing wood panel
集成材
1.
By citing the technics flow of typical finger jointing wood panel production equipment,the article accounted for model choice,the method of equilibrium calculation of production capacity of the key equipments,such as finger jointing line,gluing machine solid wood panel and automatic planer and moulder,and finally summed up the essential principle of configuration.
以典型的集成材生产工艺流程为例,说明了集成材生产中的关键设备——指接机、拼板机和四面刨铣机的选型及生产能力平衡验算的方法,最后总结出配属的基本原则。
2.
By citing the technics flow of typical finger jointing wood panel production equipment,the article accounted for method of distribution and verification of process capability,and analyzed relations between variables effected by index of process capability.
以典型示例说明了集成材生产设备布局的方法和过程能力的验证,并分析了影响过程能力指数的各变量之间的关系。
5) Bamboo Glulam
竹材集成材
1.
Study on Present Situation of Production of Bamboo Glulam Furniture;
竹材集成材家具生产现状综述
6) Glued laminated bamboo
竹集成材
1.
Comparison and analysis of the typical structure and processing between solid wooden furniture and glued laminated bamboo furniture
实木家具与竹集成材家具典型结构与加工比较分析
2.
The physical and mechanical properties of structural glued laminated bamboo were studied and compared with LVL made from several kinds of plantation wood, as well as common structural solid wood.
测定结构用竹集成材及其竹指接集成材的主要物理力学性能,并将测试结果与几种人工林单板层积材以及常见建筑用材种的相关性能进行比较。
3.
The glued laminated bamboo furniture drawn resource of bamboo, has changed the reliance of the furniture industry on timber resources fundamentally.
竹集成材家具取材于竹材资源,很大程度上改变了家具业对木材资源的依赖。
补充资料：成材率
成材率
yield
式中b为成材率，%;Q为合格产品重量，t;G为投入如有的轧钢车间以钢锭为原料经过中间开坯，轧制成原料重量，t。材;有的车间以钢锭为原料直接轧制成材;有的车间以 成材率与金属消耗来数K成倒数的关系。钢坯为原料轧制成材;还有少数车间则是以钢材为原 ，一昼只丝xl。。一粤料加工成各种成品钢材的，所以用一种成品率计算方 “G尹、人”“K冲公.、，电二翔比价小立分极击八.:卜恨山色仁止，、I‘ 。几法，难以表示和比较生产过程中金属收得情况，难以反式中w为生产过程中造成的金属损耗量，t。可见影响映车间之间在生产技术水平和管理水平上的差异。因成材率的主要因素是生产过程中产生的各种金属损此，在成材率的计算上就有不同的方法，如锭~材成材耗。因此，提高成材率的途径主要是减少各种金属损率、锭，坯成坯率、外来坯，材成材率等，各轧钢车间耗。要根据具体情况计算。各类轧机的成材率指标见表. 由于各个轧钢车间用的原料和轧制的产品不同， 各类轧机各种产品成材率(%)卜 (衷康)ehengea一ld成材率(yield)合格产品重量与投入原料重量的百分比。为衡量金属塑性加工生产过程中金属利用程度的指标，反映了生产过程中金属收得的情况。其计算公式为: Q、.，_ b=毛冬X 100 G，、1、。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条