1) CM curing property
CM硫化特性
2) curing characteristic
硫化特性
1.
The differences of thermooxiadative stability,curing characteristic and mechanical properties of hydrogenated nitrile rubber(HNBR) with different degree of hydrogenation were disscussed.
考察了丁腈橡胶(NBR)氢化过程中聚丁二烯的顺式-1,4-结构、反式-1,4-结构及乙烯基微观结构的变化,讨论了不同氢化度的氢化丁腈橡胶(HNBR)的热氧化稳定性、硫化特性和力学性能的差异。
2.
In this paper,the influence of the ratio of the CR/PUR blends on the curing characteristic,mechanical property,hot ageing resistance and thermo compression set of the blends were studied.
研究了共混比对氯丁橡胶/聚氨酯橡胶(CR/PUR)的硫化特性,硫化胶力学性能、耐热老化性能以及高温压缩永久变形的影响。
3.
The results showed that the two types of BR had similar thermostability and curing characteristics.
结果表明:两者的热稳定性相近,具有相似的硫化特性;BR9002L的耐机械降解性能稍好于BR9000;但BR9002L具有较小的相对分子质量、较窄的相对分子质量分布、较好的加工流动性、较严重的冷流性和较长的门尼焦烧时间。
3) curing behavior
硫化特性
1.
Effect of accelerator lanthanum O,O′-diisopropyldithiophosphate on the curing behavior of NR compound;
促进剂LaDiPDP对NR胶料硫化特性的影响
2.
The results showed that the molecule structure,curing behavior and physical properties of domestic products were identical to the imported counterparts,so the domestic products could replace the imports in tires and other rubber products;the molecule structure,curing behavior and physical properties of SSBR in different trademark were different,and t.
结果表明,同一牌号的国产SSBR分子结构与日本进口产品基本一致,胶料硫化特性以及硫化胶物理性能亦相当,可以相互替换用于轮胎及其它橡胶制品中;不同牌号的SSBR分子结构有所差别,胶料硫化特性不尽相同,硫化胶物理性能各有特点,可根据实际需要选用。
3.
The results showed that by using accelerator XT-580 instead of accelerator NOBS,the curing behavior and physical properties of compound changed slightly,and the tensile properties of sidewall compound and the abrasion resistance of tread compound were improved;comprehensive physical properties and the speed performance of 7.
结果表明,促进剂XT-580等量替代促进剂NOBS对胶料硫化特性和物理性能无不利影响,其中胎侧胶强伸性能和胎面胶耐磨性能稍有提高;试制的7。
4) curing characteristics
硫化特性
1.
Effective factors on curing characteristics of silicone rubber foam;
发泡硅橡胶胶料硫化特性影响因素的探讨
2.
Study of tire curing characteristics with anisothermal analysis;
应用变温分析方法探讨轮胎的硫化特性
3.
The curing characteristics and vulcanization mechanism of powdered NR filled by dysprosium-modified carbon black;
稀土镝掺杂炭黑填充型粉末NR的硫化特性和硫化机理研究
5) vulcanization characteristics
硫化特性
1.
Analysis of vulcanization characteristics for silicone rubber foam;
硅橡胶泡沫材料硫化特性分析
2.
Effect of bismaleimide derivative on vulcanization characteristics of NR/SBR blended rubber;
双马来酰亚胺衍生物对炭黑填充NR/SBR并用胶硫化特性的影响
6) vulcanization behavior
硫化特性
1.
Study on vulcanization behavior of IIR/CIIR blends;
IIR/CIIR共混胶硫化特性的研究
2.
The performances, including vulcanization behavior, physical properties and chemical properties, of the blending compound with different blending proportion are tested and analyzed.
文中对溴化丁基橡胶与普通丁基橡胶并用的目的和意义进行了探讨 ,对不同比例并用胶料的硫化特性、物理性能、化学性能进行了测试和分析。
3.
The vulcanization behavior of EPDM sulfur curing systems was studied through the application of orthogonal testing method.
用正交试验法对EPDM硫黄硫化体系的硫化特性进行了研究。
补充资料：curium Cm
分子式：
CAS号：
性质： 一种人造放射性元素，原子序数96，原子量247(247Cm的质量数)，属锕系元素。1944年G. T. Seaborg、R. A. James和A. Giorso和用α粒子轰击239Pu制得了锔的同位素242Cm，核反应是239Pu(α,n)242Cm。已知质量数为238～251的全部同位素，均为放射性的。锔为银白色金属，熔点1340℃，有α(六方晶系)、β(立方晶系)两种同素异形体。相对密度分别为13.51和19.26。锔在水溶液中的氧化态可为+3和4+，+3价最稳定。水合Cm3+离子呈淡黄色，具有典型三价锕系离子的性质。水合Cm4+离子亦呈淡黄色，为强氧化剂。247Cm是锔的半衰期(1.56×107a)最长的同位素。242Cm(T1/2=162.8d)和244Cm(T1/2=18.11a)是锔最重要两个同位素。前者可在反应堆用中子照射241Am制备，主要用作同位素能源和制造锔—铍中子源。后者可在反应堆用中子照射239Pu、242Pu和243Am制备，主要用途是用作反应堆制备锫、锎、锿及镄的原料。
CAS号：
性质： 一种人造放射性元素，原子序数96，原子量247(247Cm的质量数)，属锕系元素。1944年G. T. Seaborg、R. A. James和A. Giorso和用α粒子轰击239Pu制得了锔的同位素242Cm，核反应是239Pu(α,n)242Cm。已知质量数为238～251的全部同位素，均为放射性的。锔为银白色金属，熔点1340℃，有α(六方晶系)、β(立方晶系)两种同素异形体。相对密度分别为13.51和19.26。锔在水溶液中的氧化态可为+3和4+，+3价最稳定。水合Cm3+离子呈淡黄色，具有典型三价锕系离子的性质。水合Cm4+离子亦呈淡黄色，为强氧化剂。247Cm是锔的半衰期(1.56×107a)最长的同位素。242Cm(T1/2=162.8d)和244Cm(T1/2=18.11a)是锔最重要两个同位素。前者可在反应堆用中子照射241Am制备，主要用作同位素能源和制造锔—铍中子源。后者可在反应堆用中子照射239Pu、242Pu和243Am制备，主要用途是用作反应堆制备锫、锎、锿及镄的原料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条