说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 混油
1)  contamination [英][kən,tæmi'neiʃən]  [美][kən,tæmə'neʃən]
混油
1.
Research on contamination caused by elevation difference in batching transportation;
管道顺序输送高差混油研究
2.
The new model of batch pipeline delivery contamination is established based on the K-εturbulent model and the wall function used to predict problem near the wall.
在K-ε紊流模型和使用壁面函数法处理近壁区问题的理论基础上,建立了顺序输送混油新的模型,并利用PHOENICS软件进行管内顺序输送数值模拟,计算结果清晰地反映出管内两油品交界面处的对流扩散传质现象。
3.
The"died oil" is the root of increasing formed contamination in batch pipeline.
在顺序输送管道中,“死油区”是增加形成混油的根源。
2)  mixed oil
混油
1.
Effective Factor on Oil Mixture and Mixed Oil Treatment in Batch Transportation;
顺序输送中混油量的影响因素及混油的处理
2.
According to the influential factors,in the LuWan product oil pipeline are applied some technical measures,such as reducing initial mixed oil,optimizing operation schedule,optimizing the separation of the mixed oil to control the amount of the mixed oil which is transferred to the final station and then the optimal method was used to increase the amount of the mixed oil that could be m.
在汽柴油顺序输送过程中,鲁皖管道根据混油产生以及影响混油量增加的因素逐步采取了减少初始混油、优化输油方案、优化混油切割等措施控制下载到末站的混油量,并且还采取了优化末站混油回掺的措施增加混油的回掺量。
3.
This paper researches a optical sensor and a new method for product oil identification and mixed oil distinguish and calculates the light intensity of the Fresnel reflection occurred at the interface between the product oil and a measuring probe.
通过分析光的变化磁场的电磁感应对介质的作用以及光在介质分子间能量传递过程建立的电子云导体模型,运用能量守恒原理对光在介质中的传播以及折射现象进行了研究,对不同成品油及其混油的折射率进行测量及相关计算,得到了计算成品油折射率和识别混油的方法。
3)  contaminated product
混油
1.
Back tail treatment for contaminated product in batch transportation in South Transport Product Pipeline;
南输成品油管道顺序输送混油的回掺处理
2.
It is [jointed out that to reduce the contaminated product ,some measures ,such as batch transporting heavy product behind light product ,cutting (?) with ball valve ,simplifying the process flow of pumping stations ,controlling the inlet pressure of (?)pin.
以格拉成品油管道为例、分析了输送距离、油品的剪切速度、中间泵站、翻越点、停输和落差6种因素对成品油管道道混油产生的影响。
3.
In batch transportation of multi-products ,the technical problem to be solved is how to reduce contaminated product volume and how to blend contaminated products produced in different mixed sections.
成品油多品种管道输送的关键是如何减少混油,以及如何处理不同油品接触段产生的混油
4)  intermixing [英][,intə'miks]  [美][,ɪntɚ'mɪks]
混油
1.
The mechanism of intermixing is analyzed.
分析了顺序输送的混油机理,在油品不可压缩、不考虑浮升力影响和油品参数不随温度变化三点基本假设的基础上,建立了混油数学模型。
2.
An intermixing model of elevation difference batching transportation is established.
建立了顺序输送高差混油模型,通过计算流体力学软件PHOENICS对它进行了模拟。
3.
The intermixing model of batch transportation was established and it was calculated with the help of Phoenics.
建立了顺序输送混油模型,使用大型计算流体力学软件Phoenics对它进行了模拟计算。
5)  kerosene-oil mixture
煤油混合油
6)  mixed oil
混源油
1.
Source composition and accumulation characteristics of Permian mixed oils in central Junggar Basin,NW China;
准噶尔盆地腹部二叠系混源油油源组成与聚集特征研究
2.
Quantitative Identification Model of Mixed Oils from Suqiao-wenan Area in Jidong Depression: Mixed experiment of typical oils and identification model of mixed oils;
冀中坳陷苏桥—文安地区混源油定量识别模式研究——典型原油混合实验及混源油识别模式
3.
It is difficult to identify the sources of mixed oils from multiple source rocks, and in particular the relative contribution of each source rock.
多烃源层叠合盆地混源油油源的定量计算是十分困难的问题。
补充资料:敌马混油,50%
分子式:
分子量:
CAS号:

性质:见敌百虫-马拉硫磷乳油,50%。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条