1) short carbon fiber
短切碳纤维
1.
Experimental study on compressive strength of short carbon fiber concrete
短切碳纤维钢筋混凝土板的平截面试验研究
2.
Preparation and property of short carbon fiber reinforced HA/PMMA bio-composites
短切碳纤维增强HA/PMMA生物复合材料的制备及性能
3.
Electromagnetic parameters of the ferrites and short carbon fiber composites were measured,and reflectivity of single-layer and double-layer composites with the thickness of 2mm is calculated in Ku waveband respectively.
使用溶胶凝胶法制备了M型和W型六角铁氧体,测量了铁氧体、短切碳纤维复合材料在Ku波段的电磁参数,并计算了层厚为2mm的单层和双层复合材料反射率。
2) short carbon fibers
短切碳纤维
1.
An in-situ polymerizing and solution co-mixing approach was used in the formation of poly(methyl methacrylate)(PMMA) matrix composites using hydroxyapatite(HA) nano-particles and short carbon fibers(C(f)) as reinforcing materials.
以丙烯腈基短切碳纤维(C(f))为增强相、纳米羟基磷灰石( HA)为改性体,并以聚甲基丙烯酸甲酯(PMMA)为基体,采用原位合成与溶液共混相结合的方法制备了C(f)/ HA-PM-MA生物复合材料。
2.
Introducing preparation of electromagnetic shielding concrete containing short carbon fibers and ferrite power, properties of micro-wave transmission and absorbing are tested.
介绍了掺短切碳纤维和铁氧体粉末的电磁屏蔽混凝土的制备,测试了样品的电磁屏蔽性能,并比较了3mm与6mm短切碳纤维及其与铁氧体的复合结构在吸波混凝土中的屏蔽效能,分析、总结了实验样品中反映出来的规律,为设计高性能电磁屏蔽混凝土提供了依据。
3.
Improved PMR type polyimide matrix resin was synthesized by incorporating flexible ether-bridged segment into polyimide matrix resin, which was employed to impregnate short carbon fibers to yield molding compound.
采用分子组合技术,通过调节柔性芳基醚链段和刚性—C_6H_4—链段分子得到性能优良的PMR型聚酰亚胺基体树脂材料,将短切碳纤维与此种PMR型聚酰亚胺基体树脂通过湿法混合工艺得到聚酰亚胺复合材料模塑粉,采用热模压一次成型技术制备短切碳纤维增强聚酰亚胺复合材料,并对其性能进行系统的研究。
3) chopped carbon fiber
短切碳纤维
1.
Millimeter wave absorbing properties of reinforced composites with different length and content of chopped carbon fiber are investigated at the bands of 8mm(26.
本文研究了不同长度和含量的短切碳纤维复合材料在8 mm波段(26。
4) short chopping carbon-fiber
短切碳纤维
1.
Silicon nitride ceramics were prepared by hot-press sintering method using α-Si3N4 power with short chopping carbon-fiber as starting materials,Y2O3-La2O3 and LiF-MgO-SiO2 as additives,respectively.
采用Y2O3-La2O3和LiF-MgO-SiO22组烧结助剂,通过短切碳纤维增韧的方法,热压烧结制备了氮化硅陶瓷,并对所得氮化硅陶瓷的相组成、微观结构和力学性能进行了分析和讨论。
2.
Csf/Si3N4 composites were prepared by hot-press sintering method using α-Si3N4 power,short chopping carbon-fiber as starting materials and sintering additives.
采用热压烧结的方法,以α-Si3N4粉和短切碳纤维为主要原料,以Y2O3和La2O3为烧结添加剂,制备Csf/Si3N4复合材料,研究了其力学性能和微波介电性能。
5) chopped high modulus carbon fiber
短切高模碳纤维
1.
Effects of porosity on the material performance of chopped high modulus carbon fiber reinforced carbon composites and carbon materials were studied.
研究了短切高模碳纤维增强碳复合材料和碳基体材料气孔率对材料力学性能的影响。
6) Chopped carbon fiber mat
短切碳纤维毡
补充资料：牵切纤维
分子式：
CAS号：
性质：由充分拉伸的丝束经牵切罗拉随机拉断制成的短纤维条。经并条、牵伸、加捻制成细纱。或直接制成细纱。风格与短纤维纱相似，手感柔软。充分拉伸丝束在一对牵切罗拉间被随机拉断，形成不同长度短纤维束。是长丝短纤化的一种方法。纤维长度随牵扯切罗拉中心距离而变化。主要用于加工绳索、工业用线、输送带、帘子线、帆布和水龙带。
CAS号：
性质：由充分拉伸的丝束经牵切罗拉随机拉断制成的短纤维条。经并条、牵伸、加捻制成细纱。或直接制成细纱。风格与短纤维纱相似，手感柔软。充分拉伸丝束在一对牵切罗拉间被随机拉断，形成不同长度短纤维束。是长丝短纤化的一种方法。纤维长度随牵扯切罗拉中心距离而变化。主要用于加工绳索、工业用线、输送带、帘子线、帆布和水龙带。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条