1) relative crystallinity
相对结晶度
1.
Great variability in wood crystal properties was inspected by X-ray diffraction,and the crystal region and relative crystallinity of China fir(Cunninghamia lanceolata) changed with different treatments correspondingly.
利用不同的方法对杉木(Cunn ingham ia lanceolata)进行处理,然后用X射线衍射仪进行检测发现,木材的变异性较大,不同的处理方法对木材结晶区域宽度和相对结晶度影响不同。
2.
The relative crystallinity and Na\-2O content in zeolite beta introduced into fluid catalytic cracking (FCC) catalyst have some effect on its catalytic performance.
β沸石的相对结晶度和Na2 O含量对引入 β沸石的FCC催化剂的催化性能有一定的影响。
3.
After being radiated by 60Co γray and high energy electron,the crystallinity index and relative crystallinity of refined cotton cellulose were determined by imfrared spectra and X-ray diffraction,respectively.
用红外光谱法和Ｘ射线衍射法，分别测定了经６０Ｃｏγ射线辐射和高能电子辐射后精制棉纤维素的结晶度指数和相对结晶度。
2) Relative bond streagth
相对结合强度
3) crystalline structure
晶相结构
1.
Influence of K_2O impurity on the crystalline structure of cordierite synthesized from waste aluminum slag;
K_2O杂质对铝型材厂工业废渣合成的堇青石材料晶相结构的影响
2.
Effects of preparation methods on crystalline structure of Ni-Mo oxide catalysts;
制备方法对Ni-Mo氧化物催化剂晶相结构的影响
3.
Using the technologies such as X-ray diffraction (XRD) and Scanning electron microscope (SEM), the article discussed the influence of the factors such as crystalline structure of standards and samples and their preparation on the analytical result when analyzing silicon dioxide content in organic glass filler ash with X-ray fluorescence spectrometry (XRF
利用X射线衍射(XRD)和扫描电子显微镜(SEM)等分析技术,探讨了用X射线荧光光谱法(XRF)分析有机玻璃填料灰渣中二氧化硅含量时标样和样品晶相结构及样品制备方法等因素对分析结果的影响。
4) crystal structure
晶相结构
1.
Dipping SiC refractory with AlPO4 saturated solution is beneficial to its crystal structure and properties.
浸渍AlPO4饱和溶液有利于SiC耐火材料晶相结构的转化,有利于材料性能的优化。
2.
The changes of crystal structure and properties of ceramic roller during its application in the roller hearth kiln were studied.
采用XRD和SEM方法表征不同位置辊棒的晶相结构与显微结构来探讨陶瓷辊棒在实际窑炉使用过程晶相结构和性能变化。
3.
The effects of PAM and microwave treatment on the morphology,particle size and crystal structure of the material were characterized by SEM,laser particle size analysis and XRD techniques.
通过SEM、激光粒度分析和XRD等技术,研究了PAM和微波处理对材料的形貌、粒度和晶相结构的影响。
5) crystalline phase
晶相结构
1.
X-ray diffraction and scanning electron microscope were used to characterize the crystalline phases and microstructures.
5H2O]为主要原料合成镁铝尖晶石(MgAl2O4),探讨氧化钛(TiO2)矿化剂对合成的MgAl2O4晶相结构、晶胞参数及微观形貌的影响。
2.
X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to characterize the crystalline phases and microstructures; Rietveld Quantification software was used to calculate the content of each phase.
采用XRD法和SEM法表征各试样的晶相结构和显微结构;用Rietveld Quantification法确定各试样中各晶相的含量;测试各试样的性能。
3.
XRD and SEM were used to characterize the crystalline phases and microstructures.
采用XRD和SEM表征试样的晶相结构和显微结构;用Rietveld Quantification法确定各试样中各晶相含量;测试各试样的性能。
6) crystalline phases
晶相结构
1.
The influence of sintering technique on crystalline phases and microstructures of mullite synthesized;
烧结工艺对合成莫来石晶相结构的影响
2.
X-ray diffraction(XRD) and scanning electron microscopy(SEM) were used to characterize the crystalline phases and microstructures.
采用XRD和SEM等主要测试手段探讨其晶相结构和显微结构,以气孔率、吸水率、体积密度等性能指标为主要评价标准选择最佳的助熔剂添加量。
补充资料：结晶度
分子式：
CAS号：
性质： 聚合物总重量中结晶部分所占的百分比。结晶度随化学结构、立体规整性、有无支链和氢键及结晶条件的不同而异。结晶度不同，同种聚合物的力学性能也不同。如低密度聚乙烯的结晶度为60％左右，而高密度聚乙烯的结晶度为90％左右。聚甲醛、聚酰胺、聚乙烯、聚丙烯、聚四氟乙烯等都是典型的结晶性聚合物，但很难得到100％的结晶，通常从熔融状态冷却后，其固体结构均为结晶和非结晶两部分组成。结晶度可用相对密度、比热容、熔解热、X射线衍射、红外光谱分析和核磁共振等法进行测定。
CAS号：
性质： 聚合物总重量中结晶部分所占的百分比。结晶度随化学结构、立体规整性、有无支链和氢键及结晶条件的不同而异。结晶度不同，同种聚合物的力学性能也不同。如低密度聚乙烯的结晶度为60％左右，而高密度聚乙烯的结晶度为90％左右。聚甲醛、聚酰胺、聚乙烯、聚丙烯、聚四氟乙烯等都是典型的结晶性聚合物，但很难得到100％的结晶，通常从熔融状态冷却后，其固体结构均为结晶和非结晶两部分组成。结晶度可用相对密度、比热容、熔解热、X射线衍射、红外光谱分析和核磁共振等法进行测定。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条