1) compound jacketing rolling
复合包套轧制
1.
Effect of compound jacketing rolling process on microstructure of difficult-to-deform superalloy GH720Li;
复合包套轧制工艺对难变形高温合金GH720Li组织的影响
2) pack rolling clad
包套轧制复合法
3) sheet
[英][ʃi:t] [美][ʃit]
包套轧制
1.
5Mo(mole fraction, %) sheet, with the thickness of 2.
采用包套轧制技术 ,在 10 5 0℃制备了 2 。
2.
5% Mo (atom fraction) sheet of 2.
采用包套轧制技术,在1050℃(炉温)制备了2。
4) pack rolling method
包套轧制法
1.
Based on the analysis to the literatures on laminar metal multiple plate,this thesis introduces the fundamentals of the new multiple technologies,including brazing and soldering rolled method,SHS method,pack rolling method,PPR method,ARB method and PIT method,and so on,and some new multiple plate produced by the new technologies from domestic and abroad.
本文在对国内外层状金属复合板生产研究文献查阅分析的基础上,着重介绍了钎焊热轧法、燃烧合成轧制法、包套轧制法、PPR方法、ARB方法、PIT方法等复合新工艺基本工作原理,以及目前国内外应用各种新工艺所生产研究的新材料复合板,同时分析了复合板生产存在的问题,展望了复合板生产工艺的发展方向。
5) roll-bonding
轧制复合
1.
The technology of roll-bonding was applied to prepare the foaming precursor in this paper.
将轧制复合工艺应用于发泡预制体的制备,研究了粉末致密化过程与面板/芯层的结合机制。
2.
Author studied the production technology of aluminum foam sandwich prepared by roll-bonding/powder metallurgy foaming process in this paper,and analyzed the effect of main technological conditions on foaming structure of sandwich layer,and optimum technological parameters were finally obtained.
研究了采用轧制复合-粉末冶金发泡法制备的泡沫铝夹心板的生产工艺,探讨了主要工艺条件对芯层泡沫结构的影响,得到了优化的工艺参数。
3.
The dynamic temperature field during roll-bonding combined with high-frequency alternating current heating has been numerically simulated by a simplified model.
通过数值模拟获得了高频加热-轧制复合过程中的动态温度场。
6) sandwich rolling
复合轧制
1.
A powder-A1 plate sandwich rolling processing is proposed for preparation of aluminum alloy foam sandwich with a metallurgy bonding interface.
通过粉末-铝板复合轧制方法制备出一种界面为冶金结合的泡沫铝夹芯板。
2.
The foam aluminum sandwich panels with metallurgy bonding interface are prepared by the sandwich rolling method,the two Al face-sheets are stacked and mixed powders with foam agent are put between them,which are sandwich rolled and a foaming precursor is obtained,then it is foamed in heating furnace.
采用复合轧制的方法,即将带有发泡剂的混合粉末置于两铝面板之间进行复合轧制使之成为预制发泡体,然后再在炉中发泡的方法,制备界面为冶金结合的泡沫铝夹芯板,通过摆锤冲击实验,研究界面为冶金结合的泡沫铝夹芯板与胶接夹芯板的冲击性能的区别。
补充资料：活套轧制
活套轧制
rolling with loop
hUOtQO zh0Zhl活套轧制(rolling with Ioop)在横列式轧机上，从上一架轧机轧出的轧件头部调转180a进下一架轧机并同时在两架以上轧机中轧制时，由于通过各架时的秒体积流量不等而形成逐渐扩大的U形积累的(即活套)一种轧制方法。这种轧制法如图所示，它主要应用于横列式、复二重式和半连续式小型和线材轧机上，采用围盘或人工操作。(见彩图插页第31页) 嗯叶价朴吼 活套轧制示意图利用围盘可以传递边长somm义sotnm的方轧件和相应尺寸的椭圆和圆断面轧件;人工用钳子喂钢操作仅用于轧制小断面(
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条