1) casting speed
拉速
1.
Statistical study on the effects of overheat and casting speed on cleanliness of rolled products;
连铸钢液过热度和拉速对轧材纯净度影响的数理统计研究
2.
Influence of casting speed variation on non-metallic inclusions in IF steel slabs;
拉速变化对IF钢铸坯非金属夹杂物含量的影响
3.
Influence of Increasing Casting Speed of Hypoperitectic Steel Slab on Heat Transfer of Mold
提高亚包晶钢板坯拉速对结晶器传热的影响
2) drawing speed
拉速
1.
The improvement of the average drawing speed for 120 mm billet is introduced.
介绍了120mm方坯拉速提高后,通过优化配水工艺、振动参数、结晶器倒锥度等措施,保证了产量、质量的稳定提高。
2.
The technical reformation to increase the drawing speed of slab caster in No.
介绍了邯钢三炼钢厂板坯连铸机提高拉速的技术改造实践,对改造前后连铸机的技术性能进行了对比,实践表明本次连铸机提速改造达到了提高产量和优化铸坯质量的目的。
3.
It is considered that chemical component, molten steel temperature of tundish and drawing speed are the main elements.
分析了宣钢炼钢厂Q235方坯产生内裂的原因,认为化学成分、中包钢水温度和拉速是导致Q235方坯产生内裂的主要因素。
3) withdrawal rate
抽拉速率
1.
Effects of withdrawal rate on microstructure and mechanical property of single crystal superalloy SRR99;
抽拉速率对SRR99单晶高温合金组织和性能的影响
2.
Relationship between primary dendrite arm spacing of Al-4.5%Cu alloy and withdrawal rate during unidirectional solidification;
定向凝固Al-4.5%Cu合金枝晶组织与抽拉速率的关系
4) high casting speed
高拉速
1.
Practice on extend in mold copper life of high casting speed slab caster;
延长高拉速板坯连铸机结晶器铜板寿命的实践
2.
Oscillation marks formation for slab continuous casting with high casting speed was expatiated through stress analyses of initial solidifying meniscus shell during an oscillation cycle with stabilizing casting status at 2.
0m/min拉速稳定浇铸时振动周期内弯月面初凝坯壳的受力情况,阐述了高拉速连铸坯表面振痕形成过程,给出振动参数与最大液体摩擦力和最大保护渣渣道动态压力关系;结合振动参数对振动过程参数的影响和实际设备状况,提出了振动参数优化方向,确定了拉速升至2。
3.
A physical model was established to study the mechanism of molten slag behavior in slab continuous casting mould with high casting speed and argon blowing,and the effects of operation parameters on the liquid surface level oscillation and the slag entrapment were investigated.
基于相似理论,利用物理模型研究了高拉速吹氩条件下结晶器内的卷渣行为,考察了工艺操作参数对结晶器内液面波动和卷渣行为的影响。
5) tensile rate
拉伸速率
1.
Effect of tensile rate on mechanical properties of NEPE propellant;
拉伸速率对NEPE推进剂力学性能的影响
2.
The effect of tensile rate on the lower yield strength of the iron and steel material was investigated,the advantage of the tensile rate of GB/T228-2002 was discussed.
研究了拉伸速率对钢铁材料下屈服强度的影响,讨论了GB/T2 2 8-2 0 0 2中拉伸速率规定的科学性。
3.
The effects of particle volume fraction, tensile rate and interface bonding strength on the properties of GB/HDPE composites were studied by tensile test and SEM observation.
通过ＧＢ／ＨＤＰＥ的拉伸实验和断口形貌分析， 研究了颗粒体积分数、拉伸速率、界面强度对ＧＢ／ＨＤＰＥ复合材料力学性能的影响。
6) stretching speed
拉伸速度
1.
Effect about the stretching speed and other parameters to fiber bundle slenderizing processing;
拉伸速度及其他参数变化对束纤维细化过程的影响
2.
The effects of stretching speed change and different speed changing positions on the m value determined were discussed.
探讨了拉伸速度的变化和不同变速位置对m值测试结果的影响。
补充资料：速禄飒拉
1.象声词。风雨声。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条