1.
Effect of Drawing Rate on Microstructure Evolution of Ti-47.5Al-2Cr-2Nb-0.2B Alloys under Directional Solidification
抽拉速率对Ti-47.5Al-2Cr-2Nb-0.2B合金的定向凝固组织的影响
2.
INFLUENCE OF WITHDRAWING RATE TRANSITION ON THE PRIMARY DENDRITE ARM SPACING AND MICROSEGREGATION OF DIRECTIONALLY SOLIDIFIED SINGLE CRYSTAL SUPERALLOY DD3
抽拉速率跃迁对定向凝固单晶高温合金DD3一次枝晶间距和微观偏析的影响
3.
Lashing velocity of pump is concerned with nature of air.
泵的抽气速率与气体的性质有关。
4.
Well injection rates in a particular area would initially be generally similar to pumping, offtake, rates.
对一个具体地段来说，井的注水速率开始时应当接近抽水速率。
5.
Pro/E-based rapid development of multi-cavity box
基于Pro/E的多型腔抽拉屉注射模快速设计
6.
Influence of Withdrawal Rate on the Micro-Porosity of Super-Alloy DZ125 in Directional Solidification
抽拉速度对高温合金DZ125定向凝固中缩松的影响
7.
HRR Profile Stitching and Velocity Estimation of Step Frequency Radar
频率步进雷达距离像抽取与速度估计的实现
8.
Analysis of pumped-storage hydro using wind power with different probability distribution parameters of wind speed
不同风速概率分布参数下的风力抽水储能分析
9.
The Calculational Method of Pumping Rate in Medical Center Suction System
医用中心吸引系统平均抽气速率的计算
10.
The growth rate can exceed the pull rate and even be negative at a given time.
生长速率可能大于拉晶速率，甚至某一时刻是负值。
11.
Error Compensation Method and Rapid Accuracy Analysis for Missile Based on Latin Hypercube Sampling
基于拉丁超立方抽样的导弹快速精度分析与误差补偿方法
12.
Three-dimensional multi-phase field numerical simulation of the morphology selection of eutectic CBr_4-C_2Cl_6 alloy with different pulling velocities
三维多相场数值模拟共晶CBr_4-C_2Cl_6合金在不同抽拉速度下的形态选择
13.
Carbon black for use in the rubber industry--Determination of light transmittance of toluene extract--Rapid method
GB/T3780.15-1997橡胶用炭黑甲苯抽出物透光率的测定快速法
14.
Slow Strain Rate Test Studies of Stress Corrosion Cracking of Pipeline Steels;
管线钢应力腐蚀慢应变速率拉伸试验研究
15.
Inner-product of Strain Rate Vector in Spherical Coordinate for Wire Drawing
线材拉拔球坐标应变速率矢量场的内积
16.
Stress Corossion Cracking Behavior of 5083 Aluminum Alloy in SSRT
5083铝合金慢应变速率拉伸下的应力腐蚀行为
17.
Microstructure of Al-Ni-Y Ternary Alloy with Directional Solidification Under Different Stretching Velocities
Al-Ni-Y三元合金不同拉伸速率的定向凝固组织
18.
Measurements of vehicle Velocity in Tractor Accelerating Slip-ratio Real-time Measuring
拖拉机滑转率实时测量中的车速测量方法