1) infiltration
[英][,infil'treiʃən] [美][,ɪnfɪl'treʃən]
熔渗
1.
Present progress of studies on interfacial modification in SiCp/Al composites fabricated by infiltration process;
无压熔渗制备SiCp/A l复合材料的界面改性研究进展
2.
Effect of Infiltration Pressure on Al-based Composites Reinforced by Si Particle;
熔渗压力对制备硅颗粒增强铝基复合材料的影响
3.
Preparing low-copper W-Cu alloys by infiltration;
熔渗法制备低铜W-Cu合金
2) melt infiltration
熔渗
1.
TiC-TiN-based, WC-based cermets were subjected to a hybrid treatment of melt infiltration and nitridation in high temperature and high pressure.
采用熔渗/氮化复合处理技术对TiC-TiN基、WC基金属陶瓷进行了高温高压熔渗/氮化处理,通过扫描电镜、能谱仪、X射线衍射等分析技术对其显微组织、成分及结构进行了分析。
2.
Ti(C,N)-based cermet was subjected to a multiple surface treatment of melt infiltration and nitridation at high temperature and high pressure.
对Ti(C,N)基金属陶瓷进行了高温高压熔渗/氮化复合表面处理,通过扫描电镜、能谱仪、X射线衍射等分析技术对其显微组织、成分及结构进行了分析,并对其处理前后的硬度进行了测试分析。
3.
In this paper,chemical pure nickel powder,titanium powder,aluminum powder,graphite powder as raw material,TiC/Ni3Al porous performs were prepared by self-propagating high temperature synthesis method(SHS),and pressureless melt infiltration method was used to preparing TiC/Ni3Al composites.
以化学纯镍粉、钛粉、铝粉、石墨粉为原料,采用燃烧合成方法制备了TiC/Ni3Al含孔预制件,用无压熔渗法制备了TiC/Ni3Al复合材料。
3) infiltrate
[英]['ɪnfɪltreɪt] [美]['ɪnfɪl'tret]
熔渗
1.
Based the requirement of property of CuWAlTe,we adopted special high-temperature infiltrate technology to meet the need of vacuum contactor,successfully resolved the loss of Te content in electric-alloy and passed by normal test.
根据真空接触器对CuWAlTe电触头的性能要求,采用特有的熔渗技术,成功解决了制备CuWAlTe时Te挥发引起的Te含量低的问题。
2.
This paper deals with the properties of high voltage switch CuW contact infiltrated under H2 atmosphere, and the affect factors are analyzed.
重点研究了H2 气氛熔渗方法制造的高压开关CuW触头材料的物理机械性能 ,分析了影响材料性能的因素。
4) molten copper infiltration
熔渗Cu
5) molten salt leakage
熔盐渗漏
1.
Through repairing the fixed bed calandria reactor during the molten salt leakage test in 2×104 t/a cis-butenedioic anhydride unit in Lanzhou Petroleum and Chemical Corporation,a pack of reasonable,practical and feasible technologic means was found to confirm the leakage points caused by molten salt and to repair it in reactor.
通过对兰州石油化工公司2×104t/a顺酐装置中的固定床列管式反应器熔盐渗漏的返修,摸索出一套实用、合理可行的熔盐渗漏漏点确认以及返修的工艺方法,可为类似反应器的制造提供一定的借鉴。
补充资料：渗渗
1.寒冷貌。 2.指因害怕而产生发冷的感觉。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条