说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 聚苯胺
1)  polyaniline
聚苯胺
1.
Research and Prospect of Conductive Polyaniline/rubber Composites;
导电聚苯胺/橡胶复合材料的研究进展
2.
Sensitive properties for NH3 of sulfonic acid doped polyaniline;
磺酸掺杂聚苯胺的氨敏性能
3.
Preparation and Electric Properties of the Nano-polyaniline in the Homogeneous Reaction Medium;
纳米聚苯胺在均相反应介质中的合成与导电性能研究
2)  PANI
聚苯胺
1.
Preparation and characterization of PANI/CrN nano-composites;
聚苯胺/氮化铬纳米复合材料的制备及表征
2.
Synthesis and characterization of PANI-SnO_2 nanocomposites;
聚苯胺-二氧化锡纳米复合材料合成及表征
3.
Research on Promotion of PANI/Polymer Composites by Emulsion Polymerization;
乳液法改性制备聚苯胺/聚合物复合材料的研究进展
3)  PAn [英]['pæn]  [美][pæn]
聚苯胺
1.
Study of Electrocatalytic Oxidated Performance for Methanol on Pt/PAn/GC Decorated Electrode;
聚苯胺修饰电极对甲醇的电催化氧化研究
2.
Study on the preparation of Ni-PAN composite electrode with double pulse electroplating and its hydrogen evolution property;
双脉冲电沉积制备Ni-聚苯胺复合电极及其析氢性能的研究
3.
Surface Modification of PAn Particles;
聚苯胺颗粒材料的表面改性
4)  polyaniline(PANI)
聚苯胺
1.
The temperature dependence of the resistivity of polyaniline(PANI) NSA(naphthalenesulfonic acid) samples composed of nanotubes and synthesized by a template free method has been investigated in the temperature range of 80K≤ T ≤300K.
通过研究用自组装法制备的萘磺酸掺杂的纳米管结构聚苯胺 (苯胺与萘磺酸的摩尔比分别为 1∶0 2 5 ,1∶0 5 ,1∶1,1∶2 ,1∶3)的电阻率 温度依赖关系 (测量温区为 80— 30 0K) ,仔细分析聚苯胺的结构形貌特征 ,提出了变程跳跃 隧道穿透混合模型 :认为在萘磺酸掺杂的纳米管结构聚苯胺样品中 ,跳跃和隧穿两种机制同时起作用 ,载流子沿纳米管传导是变程跳跃过程起主要作用 ,而载流子在纳米管之间的传导是隧穿过程起主要作用 。
2.
Polyaniline(PANI) have been widly applied in technology such as rechargeable batteries, electrochromism, electromagnetic interference shielding and metal anticorrosion because of their variable structure, environmental stability and relative high conductivity.
聚苯胺(PANI)由于具有结构多样化、环境稳定性好以及优良的电导率等特点,在二次电池、电致变色、电磁屏蔽、金属的防腐等领域有着广阔的应用前景。
3.
Polyaniline(PANI) has been widely applied in most fields because of its variable structure,particular adulterate nature and excellent anticorrosion performance and other specialties.
聚苯胺(PANI)由于结构多样化,独特的掺杂性以及优良的防腐性能等特点,在各个领域都有着广阔的应用前景。
5)  polyaniline(PAn)
聚苯胺
1.
Results indicated that the electrodepositing rates of polyaniline(PAN) increase in the presence of Zn~(2+).
应用循环伏安法和扫描电子显微镜(SEM)研究了ZnSO4 对电化学合成聚苯胺(PAN)的影响。
2.
Charge transport in “dry” polyaniline(PAn)/thiokol rubber(TR) composite film was investigated by the method of electrochemical impedance spectra.
利用电化学交流阻抗的方法研究了苯胺与聚硫橡胶干态复合膜内的电荷传输问题,通过非线性最小二乘法拟合,得出了聚苯胺(PAn)与聚硫橡胶不同配比膜的等效电路,并计算出其电荷扩散系数和异相电子传递反应的交换电流。
6)  polychloroaniline
聚氯苯胺
1.
Three principal ways to synthesize the polychloroanilines such as chemically oxidative solution polymerization,chemically oxidative emulsion polymerization and electrochemical polymerization are concluded.
化学氧化溶液聚合法、化学氧化乳液聚合法和电化学氧化聚合法是目前合成聚氯苯胺的主要方法,所得聚氯苯胺具有类似于聚苯胺骨架的大π键共轭结构,氯取代基的存在使其显示出优异的溶解性和敏感的电催化性。
补充资料:聚苯胺
分子式:
CAS号:

性质: 一种发现最早的共轭导电聚合物,其电导率在5~10S/cm之间。在酸性介质中,苯胺单体经电化学或化学氧化聚合成导电聚苯胺。它由还原单元和氧化单元构成,其比值在0~1之间,不同比值对应于不同的结构、组分、颜色以及电导率。只有比值为1的中间氧化态经质子掺杂后可变为导体。聚苯胺的电导率与体系的pH值有强烈的依赖关系。随着pH值的减少,其电导率经历明显的绝缘体(pH值≥4)-半导体(2≤pH值≤4)-导体(pH值≤2)的变化,掺杂并没使聚苯胺主链上的电子数发生变化。在电极表面生成的聚苯胺有更好的导电性能。聚苯胺的掺杂是质子酸型掺杂,因此掺杂过程是质子转移过程,其电学性能不仅与聚合度,掺杂剂种类和掺杂程度等因素有关,而且还受到周围介质酸度的影响。聚苯胺生产的原料便宜,合成方法简单,且空气稳定性好,是一种具有工业化潜力的导电材料,广泛应用在蓄电池、光电化学电池、非线性光学材料、发光二极管、电磁屏蔽材料等方面。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条