1) emulsification wastewater
乳化液废水
1.
Preparation and application of loaded catalyst on the process of catalytic wet air oxidation to emulsification wastewater;
乳化液废水催化湿式氧化处理工艺中的负载型催化剂的研制与应用
2.
This article studied the change of possible biochemistry and toxicity of emulsification wastewater before and after wet air oxidation and also studied the treating effect of wet air oxidation on emulsification wastewater after SBR process.
研究了乳化液废水湿式氧化前后的可生化性和生物毒性变化,并考察了SBR工艺处理湿式氧化后的乳化液废水的效果。
3.
According to the experimental results of homogenous catalytic oxidation of Cu salts of emulsification wastewater,it is found that the catalytic activity of single-metallic salts accords with: Cu(NO3)2 > MnSO4 >CoCl2.
乳化液废水的均相催化湿式氧化实验发现,单一金属盐催化活性:Cu(NO3)2>MnSO4>CoCl2。
2) emulsified wastewater
乳化液废水
1.
Study of Fenton′s reagent and wet hydrogen peroxide oxidation for treatment of emulsified wastewater;
芬顿试剂和湿式过氧化氢氧化法处理乳化液废水研究
2.
A design example of the treatment of emulsified wastewater;
乳化液废水处理工程的设计实例
3) emulsion waste water
乳化液废水
1.
The inorganic ceramic ultra-filtering film technology has been used for disposal of emulsion waste water from the Cold Rolling Plant of Panzhihua Iron & Steel Co.
无机陶瓷超滤膜技术已用于处理攀钢冷轧厂乳化液废水,具有处理出水水质稳定,废油含水率低回收价值高,对环境不产生二次污染,与化学破乳法和有机膜处理法比较具有工程投资少、运行费用低、出水水质稳定等优点。
2.
Commonly used treating methods for emulsion waste water from cold rolling plants of iron and steel enterprises are: ultrafiltration method, floating method of chemical emulsion breaking and air addition and electric floating method.
钢铁企业冷轧厂乳化液废水常用的处理方法有:超滤法、化学破乳加气浮法、电气浮法,介绍了这几种方法的原理、工艺、效果,比较了它们的优缺点。
3.
In terms of the domestic latest technology,taking for example the disposal of oil-containing emulsion waste water from cold rolling of Wuhan Iron and Steel (Group) Co,it investigated a new process that integrated reasonably air floatation,ultrafiltration and biochemistry,and the process could be controlled flexibly.
借鉴国内最新技术研究成果,结合武钢某冷轧含油乳化液废水处理实例,探索一种将气浮、超滤、生化合理组合,并能灵活控制的新处理思路。
4) emulsion wastewater
乳化液废水
1.
The possibility of electrocoagulation treatment on cold rolling plant emulsion wastewater has been stud- ied.
研究了用电凝聚法处理冷轧乳化液废水的可行性,对比了直流电凝聚与交流电凝聚处理乳化液废水的效果,考查了直流条件下电流密度、电极间距、pH值、电凝聚时间等因素对COD、浊度去除效果的影响。
5) emulsified oily wastewater
乳化液废水
1.
Emulsified oily wastewater, which is functional in cooling,lubricating and washing, is widely used in metal material proce ssingand machining industry and the wastewater which is produced duringthe machining process is the one of O/W in high density.
乳化液废水广泛应用于金属材料加工和机械加工行业，具有冷却、润滑及清洗作用。
6) emulsified cutting wastewater
切削液乳化废水
1.
Treatment of emulsified cutting wastewater with ceramic membrane;
陶瓷膜处理切削液乳化废水
补充资料：焦化厂含酚氰废水处理设计(见含酚氰废水处理设计)
焦化厂含酚氰废水处理设计(见含酚氰废水处理设计)
design of phenolic and cyanic waste water treatment for coking plant
J iaohuaehang honfenging feishui ehuli sheji焦化厂含酚氛废水处理设计(design of phe-nolie and eyanie waste water treatment foreoking plant)见含酚氛度水处理设计。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条