1) waste emulsion
废乳化液
1.
In this paper, waste emulsion was treated by ceramic membrane.
考察了在不同温度、不同浓缩倍数条件下陶瓷膜对废乳化液的处理效果及渗滤液通量变化情况。
2.
The COD(Chemical Oxygen Demand) of waste emulsion from double cold rolling reaches over 20000mg/L.
二次冷轧过程产生的废乳化液COD值高达20,000mg/L以上,由于其成分复杂,在钢铁企业广泛应用的超滤预处理方法不能满足后续的生化处理要求。
2) emulsion wastewater
乳化液废水
1.
The possibility of electrocoagulation treatment on cold rolling plant emulsion wastewater has been stud- ied.
研究了用电凝聚法处理冷轧乳化液废水的可行性,对比了直流电凝聚与交流电凝聚处理乳化液废水的效果,考查了直流条件下电流密度、电极间距、pH值、电凝聚时间等因素对COD、浊度去除效果的影响。
3) emulsified wastewater
乳化液废水
1.
Study of Fenton′s reagent and wet hydrogen peroxide oxidation for treatment of emulsified wastewater;
芬顿试剂和湿式过氧化氢氧化法处理乳化液废水研究
2.
A design example of the treatment of emulsified wastewater;
乳化液废水处理工程的设计实例
4) emulsification wastewater
乳化液废水
1.
Preparation and application of loaded catalyst on the process of catalytic wet air oxidation to emulsification wastewater;
乳化液废水催化湿式氧化处理工艺中的负载型催化剂的研制与应用
2.
This article studied the change of possible biochemistry and toxicity of emulsification wastewater before and after wet air oxidation and also studied the treating effect of wet air oxidation on emulsification wastewater after SBR process.
研究了乳化液废水湿式氧化前后的可生化性和生物毒性变化,并考察了SBR工艺处理湿式氧化后的乳化液废水的效果。
3.
According to the experimental results of homogenous catalytic oxidation of Cu salts of emulsification wastewater,it is found that the catalytic activity of single-metallic salts accords with: Cu(NO3)2 > MnSO4 >CoCl2.
乳化液废水的均相催化湿式氧化实验发现,单一金属盐催化活性:Cu(NO3)2>MnSO4>CoCl2。
5) emulsion waste water
乳化液废水
1.
The inorganic ceramic ultra-filtering film technology has been used for disposal of emulsion waste water from the Cold Rolling Plant of Panzhihua Iron & Steel Co.
无机陶瓷超滤膜技术已用于处理攀钢冷轧厂乳化液废水,具有处理出水水质稳定,废油含水率低回收价值高,对环境不产生二次污染,与化学破乳法和有机膜处理法比较具有工程投资少、运行费用低、出水水质稳定等优点。
2.
Commonly used treating methods for emulsion waste water from cold rolling plants of iron and steel enterprises are: ultrafiltration method, floating method of chemical emulsion breaking and air addition and electric floating method.
钢铁企业冷轧厂乳化液废水常用的处理方法有:超滤法、化学破乳加气浮法、电气浮法,介绍了这几种方法的原理、工艺、效果,比较了它们的优缺点。
3.
In terms of the domestic latest technology,taking for example the disposal of oil-containing emulsion waste water from cold rolling of Wuhan Iron and Steel (Group) Co,it investigated a new process that integrated reasonably air floatation,ultrafiltration and biochemistry,and the process could be controlled flexibly.
借鉴国内最新技术研究成果,结合武钢某冷轧含油乳化液废水处理实例,探索一种将气浮、超滤、生化合理组合,并能灵活控制的新处理思路。
6) emulsified oily wastewater
乳化液废水
1.
Emulsified oily wastewater, which is functional in cooling,lubricating and washing, is widely used in metal material proce ssingand machining industry and the wastewater which is produced duringthe machining process is the one of O/W in high density.
乳化液废水广泛应用于金属材料加工和机械加工行业，具有冷却、润滑及清洗作用。
补充资料：反相乳化钻井液
分子式：
CAS号：
性质：又称反相乳化泥浆，逆乳化泥浆，油包水钻井液。是一种油包水乳液。作为分散相的水含量可达50%。由乳化剂、高分子皂类、有机土、无机盐类、矿物油(连续相)及一些专用处理剂与水配制而成。
CAS号：
性质：又称反相乳化泥浆，逆乳化泥浆，油包水钻井液。是一种油包水乳液。作为分散相的水含量可达50%。由乳化剂、高分子皂类、有机土、无机盐类、矿物油(连续相)及一些专用处理剂与水配制而成。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条