1) magnesium matrix composites
镁基复合材料
1.
Review on the friction and wear performances of magnesium matrix composites;
镁基复合材料磨损性能研究进展
2.
Optimization of Preparing Technology for SiCp/AZ61 Magnesium Matrix Composites;
SiC_p/AZ61镁基复合材料制备工艺的优化
3.
Problems of the Gr(C)/Mg interface in Gr(C) fiber reinforced magnesium matrix composites;
石墨(碳)纤维增强镁基复合材料的界面问题
2) magnesium matrix composite
镁基复合材料
1.
Study on SiC particulate reinforced AZ91 magnesium matrix composite;
SiC颗粒增强AZ91镁基复合材料的研究
2.
Deformed microstructures and mechanical properties of magnesium matrix composites by powder metallurgy;
粉末冶金制备镁基复合材料的变形组织及性能
3.
The present status of particulate reinforced magnesium matrix composites;
颗粒增强镁基复合材料的研究现状
3) Mg Matrix Composites
镁基复合材料
1.
The microstructure of interface for Mg matrix composites with different enhances were summarized, and the optimization way of interface was discussed.
论述了采用不同增强物增强的镁基复合材料的界面微观结构,并对界面优化的方法进行了探讨。
2.
The advantages of the in situ synthesized composites,as well as the principles,merits and disadvantages and the present research progress at home and abroad of the in situ synthesized Mg matrix composites are presented.
阐述了镁及镁合金的特性,介绍了原位复合材料的优点及原位制备镁基复合材料的方法原理、优缺点和国内外的研究进展。
4) Mg Li composites
镁锂基复合材料
5) Mg-Zn-based composite
镁锌基复合材料
1.
The microstructure and mechanical properties of Mg2Si reinforced Mg-Zn-based composite before and after equal channel angular pressing(ECAP) were studied.
研究了573K温度下等通道转角挤压前后Mg2Si增强镁锌基复合材料的显微组织和力学性能。
6) Al2O3-SiO2/AZ91D magnesium matrix composites
Al2O3-SiO2/AZ91D镁基复合材料
1.
Al2O3-SiO2/AZ91D magnesium matrix composites with compacted structure were prepared with aluminum silicate fibers and AZ91D magnesium alloy by squeeze casting method.
采用硅酸铝纤维和镁合金制备出结构紧密的Al2O3-SiO2/AZ91D镁基复合材料。
补充资料：碳化硅颗粒增强镁基复合材料
分子式：
CAS号：
性质：以镁合金为基体，由碳化硅颗粒增强的金属复合材料。通常加入3～20μm的颗粒15％～25％可明显提高材料的强度(拉伸强度399～428MPa)、弹性模量(79～84GPa)和延伸率(5.7％)。采用粉末冶金法和搅拌熔铸法制造，因具高比强度、比模量和耐磨性。用于制造齿轮、泵盖和武器零件。
CAS号：
性质：以镁合金为基体，由碳化硅颗粒增强的金属复合材料。通常加入3～20μm的颗粒15％～25％可明显提高材料的强度(拉伸强度399～428MPa)、弹性模量(79～84GPa)和延伸率(5.7％)。采用粉末冶金法和搅拌熔铸法制造，因具高比强度、比模量和耐磨性。用于制造齿轮、泵盖和武器零件。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条