1) hot delivery and hot charging equipment
热送热装设备
1.
By analyzing the problems that come when the hot delivery and hot charging equipment of continuous casting billet is working in High Speed Rod And Wire Factory of Huaxi Iron And Steel Co.
介绍了华西钢铁有限公司高速线材厂连铸坯热送热装设备的使用情况,针对使用过程中出现的问题,进行了分析并提出了改进措施,取得了良好的经济效益。
2) hot delivery and hot charging
热送热装
1.
The practice of hot delivery and hot charging of continuous casting billet in the Bar Plant of Tangshan Iron and Steel Corporation;
唐钢棒材厂连铸坯热送热装实践
2.
Hot delivery and hot charging technology of continuous casting slab includes two technologies: hot delivery and hot charging rolling,and direct charging rolling.
连铸坯热送热装工艺分为热送装炉轧制和直接装炉轧制两种。
3.
The high temperature and quick rolling technology was applied based on the hot delivery and hot charging process combining with regenerative reheating technique in Shaoguan Iron and Steel Co.
介绍了韶关钢铁股份有限公司三轧厂将连铸坯热送热装技术与蓄热式加热炉加热技术有机地结合,采用高温快轧工艺,不仅使企业实现了节能降耗,而且提高了生产率和产品质量。
3) CC-HCR
热装热送
1.
APPLICATION OF CC-HCR TECHNIQUE ON ENGINEERING DESIGN OF HOT-ROLLED STRIP;
连铸坯热装热送在热带工程设计中的应用
2.
The paper simulated and resolved the temperature grads change of the casting billet by computer in the course of the CC-HCR the research object is the continuous square casting billet in the CC-HCR of bar in Tang Shan Iron and Steel Group.
以唐钢棒材厂现有热装热送工艺中的连铸方坯为研究对象,考虑了带与不带保温罩两种热送条件,结合辐射和对流的复合边界条件,对铸坯在热送过程中的温度梯度的变化进行了计算机模拟与解析,所得结果与实测符合得较好。
4) hot charging
热送热装
1.
By using SEM,TEM,EDX and quantitative analysis of precipitates,and simulating the hot charge rolling of Nb-V-Ti-Mo series low carbon microalloy steel in laboratory,the solution and precipitation of microallyed elements during rolling had been investigated at hot charging temperature 750 ℃ and 1100 ℃,respectively.
运用SEM、TEM、EDX及析出物定量分析等方法,通过实验室模拟热送热装工艺,研究了X80管线钢坯分别在750℃和1100℃热装轧制时微合金元素的固溶和析出情况。
2.
This paper introduces the change of microstructure and properties of the rolled rail steel of CC bloom in hot charging.
文章主要介绍了采用钢轨钢连铸坯热送热装工艺生产钢轨组织的变化和所能达到的各项性能指标。
3.
The results of energy saveing and increase of productivity with hot charging of continuous cast slabs at Maanshan Iron & Steel Co.
介绍了马钢实施热送热装以来在节能、增产方面所取得的成效,以及马钢第三炼钢厂连铸坯热送热装 工艺,并提出几点建议。
5) HCR/DHCR
热送热装
1.
concept and technology of load oriented production mission put in is analyzed, Based on slab inventory analysis about cenain rolling mill, calculation method of slab inventory is brought forward and reasonable inventory quantity is calculated for this mill, inventory in different HCR/DHCR condition is analyzed, theory gist is given for steel enterprise to deduce slab inv.
基于对某钢厂热轧板坯库库存解析,提出了计算库存的方法并计算了该厂的合理库存,分析了各种热送热装方式的库存容量,为钢铁企业降低在制品库存提出了理论依据。
6) HCR
热送热装
1.
Analysis of the Temperature of Slabs out of CCM in HCR Technology;
热送热装工艺中板坯出连铸机温度的分折
2.
STUDY ON OPTIMIZATION METHOD OF HCR MANUFACTURE PLAN;
热送热装生产计划优化方法研究
3.
According to existing problems in HCR management at a metallurgical enterprise,a method based on business process re-engineering for HCR management was proposed,and a new process of business was designed.
针对某冶金企业在热送热装生产组织过程中存在的问题 ,提出了利用业务流程重组的方法对企业的生产业务流程进行改造 ,规划了新的业务流程 ,并对其实施后的预期效果进行了分析。
补充资料：热装
热装
hot charging
rezhuang热装(hot。harging)将热锭装入均热炉的工艺操作。热钢锭占入炉钢锭的百分比称热锭率。通常情况下，从脱模跨间热送至初轧车间的钢锭，可以直接装炉加热，(见彩图插页第3页)只有装炉温度低于600℃的合金钢和低于500℃的高碳钢钢锭才须按规定凉炉后装炉(见钢锭加热)。 热装同冷装相比较具有如下优点:(l)加热周期短，装炉温度为700℃时钢锭的加热时间约为冷锭加热时间的一半;(2)燃料消耗低，钢锭平均装炉温度为900℃时的标准燃料单耗为15一19kg八钢，而冷锭的单耗为85一nskg八钢;(3)金属烧损少，平均装炉温度为800C时钢锭加热全过程的烧损率为1.34%，而冷锭的烧损率为2.07%。可见，提高钢锭的热锭率和装炉温度有极大的经济效益。 ‘毛太奄、
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条