1) compression-diffusion composite connection
压接-扩散复合连接
1.
Experimental study on compression-diffusion composite connection of Cu/Al joint
铜铝接头压接-扩散复合连接工艺及试验
2) cold pressing-dispersal composite connection
冷压-扩散复合连接
1.
T2 Cu and 2A50 Al alloy were welded by cold pressing-dispersal composite connection technology.
用冷压-扩散复合连接技术焊接T2铜与2A50铝合金,用SEM、EDS、XRD等方法对焊接接头进行了分析。
3) reactive composite brazing
反应复合-扩散连接
4) diffusion bonding
扩散连接
1.
Influence of gap on diffusion stress in expansion stress diffusion bonding;
装配间隙对膨胀压差法扩散连接压力的影响
2.
Fabrication of Magnesium/aluminum Laminated Composites by Diffusion Bonding and Its Interface Properties;
镁/铝层状复合材料的扩散连接制备及界面特性
3.
Research status of brazing and diffusion bonding of ceramic and metal;
陶瓷/金属钎焊与扩散连接的研究现状
5) diffusion bonding
扩散接合
1.
In order to study the effect of diffusion bonding technology parameters on the joint strength of MoSi2 heating element cold-hot end,the technological papameters such as temperature,pressure,holding time and atmosphere were researched.
为了研究扩散接合工艺参数对二硅化钼发热元件冷热端的接合强度的影响,对接合端面状态、接合温度、保温时间、接合压力和接合气氛等工艺条件进行了对比分析,并根据接合部位的断裂强度和微观结构的研究结果,建立了在本实验条件下最佳发热元件冷热端扩散接合工艺条件:接合端面粗糙度为1。
2.
By using small unit of Vacuum diffusion bonding the diffusion bonding of copper and carbon steel 45(carbon 0.
利用自制小型真空扩散接合装置研究了铜与45钢的扩散接合,并对接合区的原子迁移行为及组织和硬度变化进行了分析。
3.
The experimental research on'diffusion bonding of spheroidal graphite cast iron and copper is conducted by adopting the self-made equipment of small vacuum diffusion bonding.
采用自制的小型真空扩散接合装置,进行了球铁与铜扩散接合试验研究。
6) TLP diffusion bonding
TLP扩散连接
1.
Effects of bonding parameters on the properties of TLP diffusion bonding joints of Ti-22Al-25Nb O-phase alloy;
连接参数对Ti-22Al-25Nb合金TLP扩散连接接头性能的影响
2.
Dissymmetry of TLP diffusion bonding of dissimilar materials;
异种材料TLP扩散连接过程的非对称性
3.
The experimental study on TLP diffusion bonding of SiC particle reinforced Al based composite and aluminium alloy is conducted,and the microstructures of TLP diffusion bond is observed using SEM(S530),and the concentration profiles of elements in the joint area are measured using EDS(Link Systems 860 Analyzer).
采用TLP扩散连接方法对铝合金与SiC颗粒增强Al基复合材料进行了连接试验研究 ,应用扫描电镜和能谱分析技术对TLP连接接头进行了微观组织观察和接头区域各元素的浓度分布测试。
补充资料：钢筋冷挤压连接施工
钢筋冷挤压连接施工
钢筋冷挤压连接施工
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条