1) cornering ability
转弯能力
1.
6 Guangzhou subway,the paper illustrates the taperness of the general ring\'s segment and the right and left twirling\'s segment,the calculation method of the cornering ability,as well as the design technique.
通过对广州地铁六号线盾构3标段管片设计、选型及施工的研究,论述了在盾构隧道曲线段的通用环管片和左右转管片的楔形量、转弯能力计算方法和设计技术,该文提供的设计计算方法对类似工程的管片设计具有参考价值。
2) sustained turn capability
持续转弯能力
3) turning performance
转弯性能
1.
A numerical simulation general program of the tractor semitrailer was used to simulate the turning performances of domestic EQ140K tractor semitrailer.
应用编制的半挂汽车列车计算机仿真程序 ,计算分析了国产EQ1 4 0K半挂汽车列车的转弯性能 ,并与国外同类型半挂汽车列车进行了比较·结果表明 ,国产EQ1 4 0K半挂汽车列车与国外同类型半挂汽车列车相比 ,在前轮转向角相同的情况下 ,稳定转弯车速要低 ;如果将国产EQ1 4 0K半挂汽车列车的牵引车车形数据稍加改动 ,则转弯性能有较大提
4) curve resistance
转弯阻力
1.
According to great difference of moving performance between track robot and wheel robot,this thesis puts emphasis on the analysis of the effect between the track and the environment,especially the curve resistance of the robot .
由于履带式与轮式运动特性的巨大差异,本文重点分析了履带式机器人运动过程中地面对履带的影响,特别是转弯运动中转弯阻力的影响,并且建立动力学模型进行仿真和实验。
5) Gravity-Turning Method
重力转弯
6) bending resistance
抗弯能力
1.
this paper describes the test on the bending resistance of segment for the 5th Beijing subway tunnel.
介绍了北京地铁五号线工程盾构管片的抗弯能力试验,根据试验数据对管片的抗弯能力做了分析,给出弯矩与变形能力曲线,并对管片弯曲能力计算方法做了理论分析,通过试验数据与理论计算结果比较分析,给出工程用弯曲能力计算公式。
2.
With the increase of shaft depth,it has been a key problem in design to make research into the contradiction between the structural strength of shaft lining and the dead weight constraint imposed by floating and dropping of the cylindrical shaft wall,vertically structural stability of shaft wall during its installation,as well as good bending resistance of structure.
随着施工井筒深度的增加,研究井壁的结构强度和悬浮下沉对自重限制的矛盾、安装过程结构竖向稳定性,以及良好的结构抗弯能力,已成为设计中的关键问题。
补充资料：后勤持续保障能力(见后勤保障能力)
后勤持续保障能力(见后勤保障能力)
sustained logistic support capability
houqin chixu baozhQng nengli后勤持续保障能力(sus‘ained 10915‘ics叩port eaPability)见后勤保障能力。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条