1) restraint flange member
约束边缘试件
1.
To improve the seismic resistance of reinforced concrete masonry shear wall structure,7 pieces of restraint flange members and 1 piece of flange member without restraint were tested under axial compression load.
为了增强砌块剪力墙结构的抗震能力,进行了7个内置箍筋的砌块砌体剪力墙约束边缘试件和1个无约束试件的轴压试验,约束箍筋设置在砌块壁内,试件的设计考虑了试件的体积配箍率、箍筋的形式和箍筋的间距影响。
2) confined boundary zone
约束边缘构件
1.
A computational method for curvature ductility of shear walls with confined boundary zones was established.
试验和理论分析都表明，为保证剪力墙达到预定的延性要求，应限制剪力墙的相对压区高度（或轴压比）和设置约束边缘构件。
3) confined boundary element
约束边缘构件
1.
The confined boundary elements of the specimens are designed according to "Code for Seismic Design of Buildings" (GB50011 - 2001).
通过5片以冷轧带肋钢筋焊接网作为分布筋、按《建筑抗震设计规范》GB50011-2001设置约束边缘构件的的矩形、工形和T形截面剪力墙在反复荷载作用下的试验,研究了在中、高轴压比下的冷轧带肋钢筋焊接网剪力墙的延性、变形能力及截面的应变分布;由极限破坏时截面应变分布的试验结果,计算剪力墙沿高度的位移分布,所得结果与试验结果的比较验证了计算方法的合理性。
2.
The confined boundary elements of the specimens were designed according to Code for Seismic Design of Buildings (GB50011—2001)and the cold rolled ribbed welded steel fabrics were used as the distributed reinforcements.
完成了 5个不同轴压比、不同截面形式的抗震墙试件在往复水平荷载作用下的试验 ,抗震墙的约束边缘构件按《建筑抗震设计规范》(GB5 0 0 1 1— 2 0 0 1 )设置 ,分布筋采用冷轧带肋钢筋焊接网。
4) boundary element
边缘约束
1.
Influence of boundary element on seismic behavior of reinforced concrete shear walls;
边缘约束构件对钢筋混凝土剪力墙抗震性能的影响
2.
The boundary element has an important influence on the seismic behavior of shear walls.
钢筋混凝土剪力墙的边缘约束情况是影响其抗震性能的重要因素,对于无边缘约束构件的既有剪力墙结构进行开洞改造,为验证改造后的结构的抗震性能,本文分别依据原有结构和现行规范设计、制作了10片开洞前、后的剪力墙模型,通过对其进行低周往复荷载试验,验证剪力墙开洞对结构抗震性能的影响,并验证了改造后的结构仅需进行简单的构造加固即可达到安全性能要求。
5) edge constraint
边缘约束
1.
In the whole matching process,the corner constraint and the edge constraint were proposed to guarantee the matching speed.
在匹配过程中,为了保证其快速性引入了两种新约束:角点约束与边缘约束。
2.
Under the condition of data consistency and amplitude restriction,the motion estimation error was analyzed,with its characteristic parameter being calculated;meanwhile,in order to suppress the ringing artifacts,edge constraint was adopted and a method based on statistic analysis for judging the pixel s direction was proposed.
为改善图像超分辨率重构的效果,提出了一种基于运动估计误差和边缘约束条件的凸集投影的方法。
3.
A relaxation segmentation algorithm of forward-looking infrared (FLIR) images with edge constraint is presented.
本文提出了一种基于边缘约束的、能克服门限面技术和简单的松弛技术不足的红外目标图像松弛分割算法 ,该方法在确定显著边缘象素的基础上 ,建立了一个评估在不同初始概率下松弛分割结果的准则函数 。
6) edge restriction
边缘约束
1.
In this paper, we proposes a new algorithm, named multi-target extraction algorithm based on edge restriction and attraction field regularization, to overcome these shortcomings.
提出一种基于边缘约束和边缘吸引力场正则化的多目标轮廓提取算法。
补充资料：Al-Li合金构件——歼7-II飞机舱口盖及副翼扰流片
Al-Li合金构件——歼7-II飞机舱口盖及副翼扰流片
Al—Ll合金构件——歼7一I 1机舱口盖及副翼扰流片 张自供稿
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条