1) MATLAB-SIMULINK software
MATLAB-SIMULINK软件
1.
Self-defined model of MATLAB-SIMULINK software was given out and it was combined with PSS/E simulation software to carry out dynamic simulation configuration for generators and exciting models.
给出了MATLAB-SIMULINK软件的自定义模型,并将之结合PSS/E仿真软件对发电机和励磁模型进行动态仿真设置,通过将风电场接入电网的模型仿真,结果表明,风电场对系统运行造成的主要影响是风电场并网运行引起的系统电压频率的波动和系统发生故障时风电场表现出不同于传统的火电厂的运行特性,故障时系统对风电场的作用影响系统节点电压和系统频率等。
2) MATLAB/Simulink
MATLAB/Simulink软件
1.
Kinematics Simulation of Crank-pilot Bar Mechanism Based on the Software MATLAB/Simulink;
MATLAB/Simulink软件的曲柄导杆机构运动学仿真
2.
Based on the software called Matlab/Simulink,simulated block diagram is built and the influence of several important parameters to the system is analyzed.
对火箭增压系统及其关键减压器建立数学模型,利用Matlab/Simulink软件搭出仿真框图,分析几个重要参数对系统的影响,对相似弹箭体阀门系统的研究分析提供一种方法和思路,为解决增压系统动态不稳定问题进行了有益的探索。
3.
Based on space vector pulse width modulation for asychronous motor,the mathematical mode is established and simulinked in MATLAB/SIMULINK.
依据异步电动机矢量控制理论及电压空间矢量脉宽调制原理,介绍一种改进的空间矢量脉宽调制技术(SVPWM)异步电动机矢量控制系统的控制模式,利用MATLAB/SIMULINK软件建立控制系统的仿真模型,对该控制系统进行速度和负载转矩动态特性研究,给出控制系统动态仿真结果。
3) MATLAB/Simulink software
MATLAB/Simulink软件
1.
By using matlab/simulink software,the application of direct torque control(DTC)in per- manent magnet synchronous motor chives is discussed.
根据永磁同步电动机的数学模型,结合直接转矩控制理论,以空调用永磁同步电动机为例,利用Matlab/Simulink软件,对永磁同步电动机直接转矩控制仿真建模。
2.
Then the process which considers the metamorphic(t, s, S) strategy was dynamic and real-time simulated based on MATLAB/Simulink software, and provided the opportunity and quantity when the goods enter and exit the storage.
首先通过选择使库存总费用的日平均值最低的最优库存策略,建立了较复杂的变质的库存系统的仿真模型,然后基于MATLAB/Simulink软件动态实时模拟了变质的(t,s,S)策略下的库存系统的入库、出库时机和数量。
4) Matlab/Simulink software package
Matlab/Simulink软件包
1.
According to the dynamic mathematical model of asynchronous motor in αβ stator reference frame, the simulation model of AC asynchronous motor DTC system is established by using S-function and primary modules in Matlab/Simulink software package.
根据两相静止αβ坐标系下异步电机的数学模型,利用Matlab/Simulink软件包中的S函数模块和基本模块,构建出交流异步电动机直接转矩控制系统的仿真模型,对其在转矩和磁链不同控制策略下的启动过程进行了动态仿真。
5) SIMULINK
SIMULINK软件
1.
Aiming at the characteristic of pulse submerged arc welding process with change wire=feed system, the simuloting model was developed by the software of MATLAB/SIMULINK which consists of the main circuit simulation model, arc load system simulation model and arc changing system simulation model.
针对变速送丝调节系统脉冲埋弧焊的特点,利用MATLAB/SIMULINK软件对其动态过程进行了研究,建立了主电路仿真模型、电弧负载系统仿真模型及弧长变化系统仿真模型,并在此基础上形成了系统的整体仿真模型。
2.
In order to improve the accuracy of the simulation,one nonlinear dynamic simulative model for biaxial gas turbine is proposed by using calculation method of variable specific heat,in which the variation of gas-oil ratio and discharge pressure were considered,based on Matlab/Simulink.
为了提高燃气轮机仿真的精度,采用变比热容的计算方法,并考虑了油气比和排压的变化,基于Matlab/Simulink软件建立了一种非线性的考虑容积惯性的双轴燃气轮机动态仿真模型。
3.
Numerical simulation of two kinds flow valves was studied with SIMULINK software.
提出了以G型π桥液阻网络作为先导控制网络的数字式流量阀,分析了基于半桥和π桥液阻网络的数字式流量阀动态特性,应用SIMULINK软件对2种类型的流量阀动态特性进行了仿真。
6) SIMULINK software package
SIMULINK软件包
1.
A dynamic simulation tool,SIMULINK software package in MATLAB,is taken as the development tool, and applied in the dynamic response computation of the hydraulic servo closed-loop control system.
以MATLAB中动态仿真工具SIMULINK软件包为开发工具,将其应用于该液压伺服闭环控制系统的动态响应计算中,针对上述两种闭环控制系统,给出了考虑干扰量情况下的SIMULINK仿真方法。
补充资料：[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式：C16H16ClN3O3S
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条