1) mismatch-strain
失配应力
1.
The relativity of the wafer strain and channel structure was described,and the influence principle of the mismatch-strain of the channel on the electronic property were studied.
探讨了外延片应力与沟道结构的相关性,研究了沟道失配应力对电性能的影响机理。
2) thermal mismatching stress
热失配应力
1.
Analysis showed that the thermal mismatching stress was induced by the difference of thermal expansion coefficient between austenite and ferrite during quenching,and it caused the the increase of residual thermal stress in the specimens after quenching.
经分析发现,在淬火过程中因奥氏体和铁素体热膨胀系数不同而产生的热失配应力增加了试验后试样内残余热应力,较大的残余热应力在金相腐蚀过程中诱发了微裂纹;并理论上计算了热失配应力单独作用下淬火过程中微裂纹产生的临界淬火温降,为工业生产提供了理论参考。
3) stress area mismatch
应力区失配
1.
Study on the performance of stress area mismatched Panda polarization-maintaining fiber
熊猫型保偏光纤中应力区失配对光纤性能影响的研究
4) strain mismatch
应变失配
1.
Using fused magnesite micropowder and light-firing magnesite micropowder as raw material, the magnesite ceramic with strain mismatch structure was prepared by the differential densification rate between the particles and matrix through adjusting the content of light-firing magnesite in green particles or matrix.
以高纯度电熔镁砂和轻烧镁砂微粉为原料,通过调节颗粒或基质中的轻烧镁砂粉的含量,制备成颗粒的烧结收缩率小于基质,或者是基质的烧结收缩率小于颗粒的坯体,获得基质和颗粒之间的应变失配结构形式的镁质陶瓷材料,在材料中形成残余应力场,从而有效地提高了镁质单相陶瓷材料的抗热震性能。
5) performance mismatch effect
失配效应
1.
Theoretical analysis of the performance mismatch effect of bimetal sheets was implemented qualitatively.
采用理论分析对双金属板材的性能失配效应问题进行了定性分析,并以四种双金属板材的轧压成形为例,进行了弹塑性有限元分析,由分析结果可知:两金属组元材料性能差异在其结合界面处引起应力集中,其弹性模量差异对界面的最大接触应力的影响比较明显,泊松比差异对界面最大等效应力的影响比较明显,屈服极限和塑性硬化切向模量差异将在界面处产生附加拉应力,当附加拉应力超过界面结合强度时,结合界面上会出现裂纹。
补充资料：失配
1.丧失配偶。 2.失去配合;不相配。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条