1) YSZ films
YSZ溥膜
2) YSZ film
YSZ膜
1.
The eight mole percent yttria-stabilized zirconia (YSZ) electrolyte membrane was prepared by dip coating technique, then sintered at 1 400 ℃ 4 h, a dense and crack-free YSZ film with a thickness of 6 μm was obtained successfully.
采用传统的注浆成型法制备Ni基复合阳极,然后在阳极上浸渍YSZ薄膜,高温1400℃烧结4h,得到厚度约6μm且无孔致密的YSZ膜,将LSM和YSZ调制成浆料做复合阴极,并对电池的微观结构和相关性能进行测试。
3) Ag films
银溥膜
4) YSZ film
YSZ薄膜
1.
A uniform and dense 8% YSZ film was formed on the surface of H13 steel by electro-deposition and sintering.
应用电沉积-烧结方法在H13钢表面制得均匀致密的8%YSZ(钇稳定氧化锆)薄膜,在700℃空气中氧化动力学测量表明,表面YSZ薄膜可以显著提高H13钢的抗氧化性能并改变了氧化层的形貌。
2.
The orientation growth of YSZ thin films was analyzed by XRD,the microstructure of YSZ films was observed by SEM or AFM,and the preferred growth of YSZ films for different substrate temperatures was investigated.
结果表明:衬底温度较低的YSZ薄膜为非品组织,衬底温度为300—500℃时YSZ晶粒以表面能低的(111)面首先择优生长,衬底温度超过550℃后品粒活化能提高而使表面能较高的(100)晶粒择优生长。
3.
The morphology and the thickness of YSZ film were characterized with SEM.
采用恒流电泳沉积(EPD)的方法,在NiO-YSZ阳极基底上制备出较为致密的氧化钇稳定的氧化锆(YSZ)固体电解质薄膜,1300℃共烧结5h后得到具有一定厚度的YSZ薄膜。
5) YSZ ceramic membrane
YSZ陶瓷膜
6) YSZ thin film
YSZ薄膜
1.
Preparation and application of YSZ thin films;
YSZ薄膜的制备及应用
2.
Effect of anodes on the performance of YSZ thin film SOFC;
阳极对YSZ薄膜SOFC性能的影响
3.
YSZ thin film prepared by gravity deposition method combined with co-sintering method;
重力沉降法结合共烧结法制备YSZ薄膜
补充资料：[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式：C16H16ClN3O3S
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条