1) inertial concreted
惯性凝固
1.
The simulation and analysis show that the proposed inertial concreted coarse alignment is superior to the conventional one.
提出适合于舰船系泊、锚泊状态下的捷联惯性导航系统惯性凝固粗对准方法。
2) built-in inertia
固有惯性
3) solidification characteristics
凝固特性
1.
The paper summarizes the history of refractory elements addition,relates their influences on the solidification characteristics and microstructure,prospects the problems that still need to be solved and the future investigation trends.
总结了在镍基单晶高温合金的发展过程中难熔元素添加的特点,综述了难熔元素对镍基单晶高温合金的凝固特性与凝固组织的影响,并指出了其中存在的问题,展望了未来研究发展的方向。
2.
Directional solidification characteristics of successfully shaped y-TiAl alloys is then presented and investigated in relation with the experimental parameters.
本文利用课题组自行设计的真空宽调速电磁成形定向凝固实验设备，以Ti-48％Al(at％)为实验材料，采用电磁成形定向凝固技术，对极活泼的γ-TiAl工程合金无污染定向凝固组织制备工艺进行了系统的研究，并对包晶系TiAl基金属间化合物的非平衡定向凝固特性进行了初步探讨，主要研究内容及结论如下： 1。
4) solidification characteristic
凝固特性
1.
Effect of lithium on solidification characteristics of pure copper;
Li对纯Cu凝固特性的影响
2.
The casting temperature, casting speed, water flow rate of secondary cooling system and other process parameters are determined according to the solidification characteristics of 45 steel, such as low liquidus temperature, wide solidus and liquidus co-areas, low-strength slab shell under high-temperature, and to the existing equipment conditions of Caster 3.
根据45钢液相线温度低、固液共存两相区宽及铸坯坯壳高温强度低的凝固特性和3#连铸机现有的设备状况,确定了浇注温度、拉速及二次冷却配水量等工艺参数。
3.
The formation mechanism of TiC and TiB_2 particulates was studied,and the solidification characteristic of melting-pool of argon arc cladding was examined.
并分析了TiC和TiB2颗粒的形成机理和氩弧熔池的凝固特性。
5) solidification
[英][sə,lidifi'keiʃən] [美][sə,lɪdəfə'keʃən]
凝固性
1.
The preserved egg solidification depends upon the concentration of NaOH in dipping liquid.
变蛋袋浸渍料液中NaOH浓度是决定变蛋凝固性的关键因子。
2.
The results showed that at 4 30solidification would become weaker and weaker until the agar gel came to again liquid state,simultaneouly the mediums showed various colors.
０５时，琼脂水溶液可正常凝固，超过此范围，则凝固性会越来越差，直至呈现流体状态，同时培养基伴有各种颜色出现；随着溶液ｐＨ值的增大（或减小），这一现象加重；延长高温高压（压力１。
6) solidifiability
可凝固性
1.
The internal driving forces for the dissolution of the family and its solidifiability in modern literature;
“败家”的女人——现代文学“家”解体的内驱力和可凝固性
补充资料：惯性
惯性
inertia
惯性(inertia) 惯性是物质的一种性质，表现为物体对一其变化的阻抗。因此，当没有外力作用时，原来处止状态的物体将保持静止、而原来在运动中的将以不变的速度继续作直线运动(牛顿第一运律)。物体的质量是它的惯性的度量。参阅“寿(mass)条。 仁内代尔斯基(1.Nedelsky)动静淋淀剔阳
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条