1) FRP rubber isolator
FRP橡胶隔振器
1.
Pilot study on the horizontal shear behaviour of FRP rubber isolators
FRP橡胶隔振器水平剪切特性的初步研究
2) rubber isolator
橡胶隔振器
1.
Experimental study on anti-shock property of rubber isolators;
橡胶隔振器冲击刚度的试验研究
2.
An investigation of calculation methods for the dynamic characteristics of rubber isolator
橡胶隔振器动态特性计算方法的研究
3.
Expermental study on constitutive model for damping and stiffness of a rubber isolator
橡胶隔振器刚度和阻尼本构关系的试验研究
3) rubber mount
橡胶隔振器
1.
A type of friction-damper mount added to tradition rubber mount was presented to increase damp in the condition of low frequency and great swing,basing on the principle of separating vibration and character of the engineering machine.
根据隔振原理和工程机械的振动特性,提出了在传统橡胶隔振器的结构基础上增加摩擦阻尼器结构来提高其低频、大振幅条件下的阻尼性能,分析了这种摩擦阻尼橡胶隔振器的工作原理、结构及其工作特性。
2.
The drift character of rubber mount is prescribed definitely at the abroad specification.
在国外舰船橡胶隔振器标准中 ,明确规定了橡胶隔振器蠕变特性的性能要求 ,国内对这方面研究尚较为少见。
3.
The internality relationship between the rubber s static rigidity and stiffness for the rubber mount was analyzed.
分析同一类型橡胶隔振器硬度与静刚度之间的内在关系,用实验方法建立某型隔振器硬度与静刚度的函数关系;讨论刚度对隔振器性能的影响,提出基于原位测定橡胶硬度判定橡胶隔振器实时性能的无损检测方法。
4) rubber damper
橡胶隔振器
1.
A small rubber damper with property isotropy was designed through modal analysis.
本文针对某弹载结构的三点支撑式隔振系统,应用有限元方法建立了分析模型,并通过模态分析,设计了一种各向同性的小型橡胶隔振器。
5) rubber vibration isolator
橡胶隔振器
1.
Finite element calculation and experiments were used to obtain the relationship between rubber vibration isolator s static-dynamic stiffness and rubber s hardness.
采用有限元计算和试验方法,建立了橡胶隔振器静动刚度与橡胶硬度之间的关系,根据隔振器刚度失效准则,确定隔振器的失效硬度。
2.
For this situation,the method of rubber vibration isolator fixed on the side and back face is adopted to reduce noise created by the inertial force.
针对此种情况,采用在侧面和底面加装橡胶隔振器方法来降低其引起的振动噪声。
6) rubber vibration isolators
橡胶隔振器
1.
By combining this relationship and the finite element analysis technology,the serialization design method of rubber vibration isolators has been proposed,and an application instance has been given.
推导了橡胶隔振器静刚度与结构参数、材料硬度的关系式,结合有限元分析技术,提出橡胶隔振器的系列化设计方法并给出应用实例。
补充资料：[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式：C16H16ClN3O3S
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条