1) mounting error sensitivity
安装误差敏感性
1.
Based on traditional active design theory of spiral bevel gear in which parabolic function of transmission errors was predesigned,the influence of the position of mean contact point to mounting error sensitivity was considered and an improved active design method was proposed.
在Litvin等的预设定传递误差曲线螺旋锥齿轮主动设计方法基础上,考虑初始计算点位置对安装误差敏感性的影响,对预设定传递误差曲线螺旋锥齿轮主动设计方法进行了改进。
2) error sensitivity
误差敏感性
1.
Formulas are thus derived to determine the variations of error sensitivity due to various second order parameters.
推导出了点接触齿面接触点位置对安装误差敏感性的计算公式,并通过具体计算实例说明了齿面二阶参数对误差敏感性的影响;所获得的误差敏感性计算公式可作为以主动设计齿面参数进行误差敏感性控制的基础。
3) time sensitive error
时间敏感性误差
4) Installation error
安装误差
1.
Research on influence induced by installation error in SINS;
机载安装误差对捷联惯导系统的综合影响研究
2.
Orientation method of FOG/TS with installation error compensation;
具有安装误差抵偿功能的光纤陀螺/全站仪组合定向方法
3.
A high accuracy calibration method of the installation error between SINS and star sensor
一种星敏感器与捷联惯导高精度安装误差标定方法
5) installation errors
安装误差
1.
MEMS-IMU configuration and its inertial sensors’ calibration for installation errors;
MEMS-IMU构型设计及惯性器件安装误差标定方法
2.
Based on the operation principle of GFSINS,angular solution equations are derived respectively in the cases of ideal conditions and existing installation errors.
根据无陀螺捷联惯导系统(GFSINS)的工作原理,推导了理想条件下和有加速度计安装误差条件下的角速度解算方程;推导了加速度计的安装位置误差所产生的加速度计的输出误差;在静基座条件下,通过旋转惯性测量单元坐标轴的方法改变其放置位置,建立了加速度计安装位置误差的辨识公式;数字仿真结果表明,所采用的加速度计安装误差的辨识方法有效,对辨识得到的安装误差进行补偿可以显著地提高角速度的解算精度。
6) misalignment
['misəlainmənt]
安装误差
1.
The accelerometers" misalignments directly affect the guidance precision,and their influence can be effectively decreased by auto-calibration before-launching.
加速度计安装误差直接影响惯导平台的制导精度,而射前自标定可以有效降低其影响。
2.
In order to providing elevation and azimuth for gun barrel via strapdown inertial navigation system(SINS),the misalignment angle calibration between strapdown inertial measurement unit(SIMU) and gun barrel is necessary.
为了保证捷联惯导系统能够正确给出炮管高低角和方位角,必须对捷联惯组和炮管之间的安装误差角进行标定。
补充资料：安装
按照一定的方法、规格把机械或器材（多指成套的）固定在一定的地方：～自来水管ㄧ～电话ㄧ～机器。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条