1) blend composite fibers
共混复合纤维
1.
n-HAP particles were modified by silane coupling agent and different content of n-HAP were mixed in PVA uniformly,then n-HAP/PVA blend composite fibers were prepared.
通过凝胶纺丝法制备具有生物相容性的纳米羟基磷灰石/聚乙烯醇(n-HAP/PVA)共混复合纤维。
2) biconstituent fiber
聚合物共混纤维
3) complex fiber concrete
复合纤维混凝土
1.
This article considered mechanism and durability of bridge deck pavement mainly from material aspect, therefore has introduced the complex fiber concrete material.
鉴于一般混凝土桥面铺装层会出现各种各样的早期病害,本文主要从材料方面考虑加强桥面铺装层的力学及耐久性能,因此引入了复合纤维混凝土材料,它集良好的力学性能和优越的耐久性能于一体,非常适合作为桥面铺装层材料。
4) blend fiber
共混纤维
1.
Resistance of soybean protein/polyvinyl alcohol blend fibers to alkali;
大豆蛋白/聚乙烯醇共混纤维的耐碱性
2.
Preparation and properties of alginate/gelatin blend fibers;
海藻酸钠/明胶共混纤维的制备及其性能研究
3.
Manufacturing and application of alginate/gelatin blend fiber;
海藻酸/明胶共混纤维的制备与应用
5) blend fibers
共混纤维
1.
Preparation and characterization of PVA/HT blend fibers
聚乙烯醇/水滑石共混纤维的制备及其性能研究
2.
Soybean protein /polyacrylonitrile(SP/PAN) blend fibers were prepared by wet spinning and DMSO was used as solvent.
研究了以二甲基亚砜为溶剂,经湿法纺丝所制备的大豆蛋白/聚丙烯腈共混纤维的结构性能。
3.
The thermal behavious and structure of p(hydroxybenzoic acid/2-hydroxy-6-naphthoicacid)polyarylate [P(HBA/HNA)]/polyester(PET) blend fibers were investigated by means of DSC thermal analysis.
利用热分析（ＤＳＣ）的方法对聚（对羟基苯甲酸／６－羟基－２－甲酸萘［ｐ（ＨＢＡ／ＨＮＡ］／聚对苯二甲酸乙二酯（ＰＥＴ）共混纤维的结构进行了研究。
6) Blending Fiber
共混纤维
1.
Analyses of Structure and Property of Soybean Protein Cellulose Blending Fiber;
大豆蛋白纤维素共混纤维的结构与性能分析
2.
In this paper,the thermal and mechanical properties of PA-66modified PET and their blending fibers are studied By means of blending spinning,the defects of single component weft yarn can be conquered greatly and its comprehensive effect can be improved with their good propertie
对PA 66与改性PET及其共混纤维的热力学性能进行了比较和探讨。
补充资料：共混
分子式：
CAS号：
性质：用炼胶机将不同橡胶或橡胶与塑料，均匀地混炼成胶料即称为共混。两种或多种橡胶并用，或橡胶与各种塑料并用，可大大扩展橡胶制品的用途，并显著提高橡胶制品的质量性能，还可改进胶料的工艺性能，降低橡胶的耗量和降低产品造价。不同橡胶或橡胶与塑料共混时，它们间应具有较好的相容性，或是利用最佳的配比，以有利于最大限度发挥共混的技术效果。
CAS号：
性质：用炼胶机将不同橡胶或橡胶与塑料，均匀地混炼成胶料即称为共混。两种或多种橡胶并用，或橡胶与各种塑料并用，可大大扩展橡胶制品的用途，并显著提高橡胶制品的质量性能，还可改进胶料的工艺性能，降低橡胶的耗量和降低产品造价。不同橡胶或橡胶与塑料共混时，它们间应具有较好的相容性，或是利用最佳的配比，以有利于最大限度发挥共混的技术效果。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条