说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 圆锥轴承套圈
1)  tapered bearing ring
圆锥轴承套圈
1.
The coning deformation is easily caused after tapered bearing ring is quenched,rings is made cooling uniform during quenching,reduced coning deformation and greatly decreased rejects rate for changing placement method.
圆锥轴承套圈淬火后易产生锥度变形,通过改变摆放方法,使淬火时冷却均匀,减少锥度变形,大大降低因锥度变形率超差而造成的废品。
2)  taper ferrule
圆锥套圈
1.
Taking the cold rolling with the series of 2BD for ISO355 taper ferrule as the example,the method of the pair closed type rolling was used to reduce the spread of the product and to obtain a good surface.
以ISO355系列2BD圆锥套圈冷辗扩为例,采用成对闭式辗扩的方式,以达到减小成品宽展和形成良好端面的目的。
3)  tapered roller bearing
圆锥轴承
1.
Analysis and practice on reducing grinding allowance of tapered roller bearing;
减少圆锥轴承磨加工留量的分析与实践
4)  roller bearing taper cup
圆锥滚子轴承外圈
5)  inner ring raceways of tapered bearing
圆锥轴承内圈滚道
1.
To counter the situation that 3MZ1310B machine could only grind the raceways of ball bearing,the dresser of it was improved to widen processing range,so that the inner ring raceways of tapered bearing could be machined with the improved machine.
针对3MZ1310B机床只能磨削球轴承滚道的情况,对该机床修整器进行了改造,扩大了加工类型,使之能够加工圆锥轴承内圈滚道。
6)  bearing ferrule
轴承套圈
1.
The results show that the crack of GCr15SiMn steel bearing ferrule belongs to typical hydrogen brittleness crack.
采用电子金相、扫描电镜、硬度计等检测分析手段,对GCr15SiMn钢轴承套圈在磨削过程中脆断原因进行了分析。
2.
R&D "support software system of quality analysis for bearing ferrule grinding progress parameters optimization".
磨削加工是轴承精密加工的关键工艺之一,本文围绕轴承套圈磨削加工中的进给参数优化的问题展开研究,研制和开发了支持磨削进给参数优化过程的质量分析系统。
3.
The results show that the crack of GCr15SiMn steel bearing ferrule belongs to typical hydrogen brittleness crack.
采用电子金相、扫描电镜、硬度计等检测分析手段,对 GCr15SiMn 钢轴承套圈在磨削过程中脆断原因进行了分析。
补充资料:圆锥
以直角三角形的一直角边所在直线为旋转轴,其余各边旋转一周而形成的几何体。旋转轴称为圆锥的轴,在轴上的此边的长度称为圆锥的高,垂直于轴的边旋转而成的圆面称为圆锥的底面,不垂直于轴的边旋转而成的曲面称为圆锥的侧面。无论旋转到什么位置,此边都称为圆锥的母线。底面半径为r,母线为l,高为h的圆锥的侧面积为s=πrl,体积为v=13πr2h。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条