1) thermo-chemical reaction spraying
化学反应热喷涂
1.
Al2O3-based composite ceramic coating was prepared on the surface of copper by thermo-chemical reaction spraying.
使用热化学反应热喷涂技术,在紫铜表面喷涂制备Al2O3基复合陶瓷涂层。
2) reactive thermal spraying
反应热喷涂
1.
Application of reactive thermal spraying in the preparation of ceramic blade of coating machine;
反应热喷涂法制备陶瓷刮刀
2.
A kind of Ni-Ti-C composite powder for reactive thermal spraying was prepared by thermal decomposition of precursor with sucrose as carbon source.
以蔗糖为碳源,采用前驱体热分解技术制备Ni-Ti-C系反应热喷涂混合粉末,通过氧乙炔火焰喷涂技术合成并同时沉积原位TiC颗粒增强的Ni基合金复合涂层。
3) reactive thermal spray
反应热喷涂
1.
Making a comparison between ceramic coating and metal coating blade and cast iron drum dryer for wear-resist properties, we come to the conclusion that reactive thermal spraying process can enhance coati.
通过热喷涂技术并引入放热组元,制备出金属陶瓷涂层,检测了该涂层的结合强度、硬度及耐磨性;研究了反应热喷涂Al2O3金属陶瓷涂层在涂布刮刀、烘缸上的耐磨性能,并将其与金属涂布刮刀及铸铁烘缸的耐磨性能进行了比较。
2.
The results shows: reactive thermal spraying process promoted coating performance, the bonding strength of the coatings is 20MPa and porosity ratio is 5.
研究了反应热喷涂工艺及其制备的 Al2 O3金属陶瓷涂层的性能。
4) chemical heated spray
化学热喷涂
5) SHS reaction thermal spraying
SHS反应热喷涂
1.
Al_2O_3-based multiphase ceramic coating of Al-CuO system prepared by SHS reaction thermal spraying on AZ91D
在AZ91D表面SHS反应热喷涂Al-CuO系Al_2O_3基复相陶瓷涂层
6) reactive spray
反应喷涂
1.
SHS reactive spray technology, which was developed through the combination of the SHS technology and the traditional spray technology, has been developed rapidly recently.
自蔓延高温合成技术与传统热喷涂技术相融合发展的SHS反应喷涂技术,近年来获得了迅速发展。
补充资料：化学反应热
chemical reaction heat 参见“反应热效应”。简称反应热，是等温下化学反应释放或吸收的热量。反应热原则上可用两种实验方法测定：(1)用量热计直接测量，例如使反应在绝热的密闭容器中进行，通过能量衡算便可算出反应热；(2)先测定不同温度下的反应平衡常数，然后用关联反应热、反应平衡常数和温度的热力学公式计算反应热。对于难以控制和测定其反应热或平衡常数的化学反应，可根据1840年t．h．盖斯所提出的盖斯定律(化学反应或物理变化的热效应与其途径无关)。利用生成热(恒温时由最稳定的单质化合成1 mol某种化合物时焓的变化)或燃烧热(1mol某物质完全燃烧时焓的变化)间接计算。
——摘自《安全工程大辞典》（化学工业出版社）
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条