1) YAG laser-arc hybrid welding
YAG激光-电弧复合焊接
2) laser-arc hybrid welding
激光-电弧复合焊接
1.
Elimination of high frequency interference during the laser-arc hybrid welding;
激光-电弧复合焊接过程中高频干扰的消除
2.
Application of laser-arc hybrid welding in industry;
激光-电弧复合焊接的应用
3.
The laser-arc hybrid welding technology for LF6 aluminum alloy was introduced.
对LF6铝合金的激光-电弧复合焊接工艺进行了初步研究。
3) laser-arc hybrid welding
激光电弧复合焊接
1.
Laser-arc hybrid welding is a new developing welding technology, which combines the high power density of lasers with the cheapness and high efficiency of the arc welding to achieve deeper welding penetration and good adaptability.
激光电弧复合焊接是一项新兴的焊接技术,它是将高能量密度的激光与廉价高效的电弧复合在一起进行焊接,从而提高了激光焊接的焊接熔深和适应性。
2.
Laser-arc hybrid welding is a new developing welding technology, which has been well developed abroad, however it is still under the stage of fundamental research in our country.
激光电弧复合焊接是一项新兴的焊接技术,在国外已经发展得相当成熟,而我国在基础研究方面都还存在着许多不足,本文正是在这种背景下,对激光电弧复合焊接进行基础研究。
4) laser-arc hybrid welding
激光-电弧复合焊
1.
New welding technology of aluminium alloy which is newly researched throughout the world is summarized in the paper,such as laser welding,laser-arc hybrid welding and friction stir welding.
详细介绍了近年来国内外出现的铝合金焊接新技术(激光焊、激光-电弧复合焊以及摩擦搅拌焊)的原理、工艺特点以及在汽车制造中的应用。
2.
Several advanced welding techniques of magnesium alloy were introduced: A-TIG welding, electron beam welding, laser welding, laser-arc hybrid welding and friction stir welding.
介绍了镁合金先进焊接工艺,包括A-TIG焊、电子束焊、激光焊、激光-电弧复合焊和搅拌摩擦焊。
3.
The laser-arc hybrid welding technique takes a full advantage of the two heat sources.
激光-电弧复合焊技术发挥了两种热源的长处,能在不同方面、不同程度上减少或消除传统焊接中的缺陷,提高了激光能量的利用率,是焊接高强铝合金的首选工艺。
5) laser-arc hybrid welding process
激光电弧复合焊
1.
This article describes the principle, characteristics, types, interaction of laser-arc hybrid welding process, it also gives a picture of its currentsituation of research and development and finally concludes that as a new welding technique , the hybrid welding process has a promising future.
介绍了激光电弧复合焊接方法的原理、工艺特点、复合焊的几种形式、复合焊的机理研究现状及复合焊的应用,指出复合焊作为一种新型的焊接方法具有较为广阔的应用前景。
6) YAG laser welding
YAG激光焊接
1.
In this paper, pulse YAG laser welding of stainless steel string with weak - magnetism, constant -elasticity (φ= 0.
5mm,φ=5mm)的脉冲YAG激光焊接,进行了焊缝形貌、金相、成份分析,测试了接头强度,计算了焊点的熔合比及能量利用率。
2.
Dynamic process and spectral distribution of vapor/plasmas during YAG laser welding of 5A90 Al-Li alloy were obtained by high-speed camera and spectra measure system.
利用光谱测量、高速摄像等手段,对5A90铝锂合金YAG激光焊接过程中的金属蒸汽/等离子体的动态变化过程、光谱分布测量和计算表明:5A90激光焊接时金属蒸汽/等离子体几乎只从熔池正面喷出,主要强谱线为Li670。
补充资料：[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式：C16H16ClN3O3S
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条