1) siliconized layer
渗硅层
1.
Effect of boron on composition and microstructure of the siliconized layers prepared by electrodeposition in molten salts
硼对熔盐电沉积渗硅层成分及组织结构的影响
2) siliconizing coatings
渗硅涂层
3) composite layer with Si by casting
铸渗硅复合层
1.
By varying cast-penetration technics ,the influence of thickness and quality in composite layer with Si by casting on the surface of cast steel were studied.
研究了不同铸渗工艺对铸钢件表面铸渗硅复合层厚度和质量的影响。
4) siliconizing
['silikə,naiziŋ]
渗硅
1.
The structure of siliconizing silicon carbide foam ceramics strut is dense.
本文对有机前驱体浸渍法制备的碳化硅泡沫陶瓷进行渗硅处理,使碳化硅泡沫陶瓷的孔筋结构致密,20%体积分数陶瓷体的抗压强度达到32MPa,抗热震性能优良,导电特性发生变化。
2.
Pack siliconizing is one of convenient and effective methods in improving their oxidation resistances.
改善TiAl基合金的高温抗氧化性能可更大限度地发挥其性能优势,固体渗硅是一种工艺简便且行之有效的方法,深入了解渗硅TiAl基合金的氧化动力学对保证其安全应用以及进一步的理论和实验研究具有重要意义。
3.
ST5”BZ]The mechanical energy aided siliconizing process is developed.
开发研究了机械能助渗硅工艺 ,将渗硅温度由常规工艺的 950～ 1 0 50℃降低到 480～ 540℃。
5) melt_infiltrated silicon carbide
渗硅碳化硅
1.
The structure and mechanical pro_ perties of pure carbon melt_infiltrated silicon carbide (PCRBSC) were investigated.
研究了全碳粉反应渗硅碳化硅 (PCRBSC)材料的结构与力学性能的关系 ,分析了渗硅碳化硅材料中游离硅、游离碳含量对抗弯强度的影响 。
6) coating
[英]['kəʊtɪŋ] [美]['kotɪŋ]
渗层
1.
the research results indicated that after the TD salt-bath vanadizing treatment under the condition of the 980℃×5h+oil quenching+180℃×2h, the Cr12MoV steel could obtain a surface coating whose thickness was about 11.
4!m的表面渗层,且渗层厚度均匀致密并与基体呈冶金结合。
2.
The microstructures and the cyclic oxidation resistance of the siliconized coatings of Ti 48Al alloy have been studied.
研究了钛铝基合金固体渗硅后的渗层结构、抗高温循环氧化性能。
3.
Oxidation-resistant silicide coatings on the surfaces of Nb silicide based alloy were prepared by pack cementation technique.
利用SEM、EDS和XRD等检测手段分析了渗层的结构、元素分布及相组成等，并对渗层形成的反应机理及反应动力学进行了讨论。
补充资料：渗硅
分子式：
CAS号：
性质：钢铁化学热处理方法的一种。将钢铁制件放入含硅的介质（如硅铁粉或含有四氯化硅的气体）中加热，新生的活性硅渗入钢铁表层，使其表面具有耐热性和耐酸性。
CAS号：
性质：钢铁化学热处理方法的一种。将钢铁制件放入含硅的介质（如硅铁粉或含有四氯化硅的气体）中加热，新生的活性硅渗入钢铁表层，使其表面具有耐热性和耐酸性。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条