1) Asymmetrical roll-bonding
异步叠轧
2) asymmetrical accumulative rolling-bonding(AARB)
异步叠轧(AARB)
3) asymmetrical accumulative rolling bonding(AARB)
异步累积叠轧
1.
The uniform ultra-fine grained copper was prepared by asymmetrical accumulative rolling bonding(AARB)and anneal.
对铜材进行异步累积叠轧并退火处理,制备出了均匀稳定的超细晶铜材。
4) differential speed rolling
异步轧制
1.
Research on drawability of AZ31 magnesium alloy sheet processed by differential speed rolling at room temperature;
异步轧制AZ31镁合金板材室温冲压性能研究
2.
Microstructure of AZ31 magnesium alloy sheets processed by differential speed rolling;
异步轧制AZ31镁合金板材组织
3.
The objective of this study on microstructure and grain orientation of AZ31 magnesium alloy sheets produced by differential speed rolling was to investigate the possibility of improving deformability of AZ31 magnesium alloy sheets.
主要对异步轧制AZ31镁合金板材的显微组织和晶粒取向进行了研究,以探讨提高镁合金板材塑性变形能力的途径。
5) asymmetric rolling
异步轧制
1.
It is revealed that the cold rolling texture is composed of strong incomplete α(〈110〉∥RD) fiber and relatively weak complete γ fiber(〈111〉∥ND) no matter what rolling schedule is taken on,but asymmetric rolling affects greatly the textural strength and its distribution along thickness.
研究了同步和异步轧制下无取向硅钢的冷轧织构及其沿层厚的分布特征。
2.
By means of analyzing four high mill for its rolling torque,this paper has established a structrural modle that suit to calculate the rolling torque of cold strip mill drived through back-up rolls in asymmetric rolling.
用辊系力矩分析法，建立了支持辊传动四辊冷轧机异步轧制轧制力矩的理论计算结构式，并对异步冷轧轧制力矩特性进行了生产实验分析，为异步工艺在冷轧带钢生产中的应用提供了理论及实验依据。
3.
This paper is to research the thickness distribution across the strip and it's re-lationship with roll's thermal crown in asymmetric rolling.
从而为将异步轧制工艺应用于冷轧窄带钢生产提供了完整的实测数据资料和实用工程计算软件。
6) Asynchronous Rolling
异步轧制
1.
Microstructure and Properties Evolution of Asynchronous Rolling AZ31 Magnesium Alloy Sheets during Annealing
异步轧制AZ31镁合金板材在退火处理中的组织性能演变
2.
The magnetic rariance is studied of different thiclcness two crystallization grain-oriented silicon steel finished product, underasynchronous rolling condition, the relationship is found between the tnagnetic and finished products thickness and asynchronous speed ratio of the grain oriented silicon steels.
研究了异步轧制条件下不同厚度的二次再结晶取向硅钢成品的磁性能的变化,找到了硅钢磁性能与成品厚度和异步速比之间的关系。
3.
The results indicated that the asynchronous rolling is effective to decrease rolling passes and improve the rolled texture and magnetic properties of thin silicon steel sheets.
结果表明 :异步轧制可有效地减少轧制道次 ,并有利于改善硅钢薄带的织构和磁性
补充资料：薄板叠轧
将几层钢板叠在一起,用二辊轧机热轧成薄于2mm的薄板的工艺。18世纪初，西欧就开始用热叠轧法轧制小块薄钢板。直到20世纪初，大部热轧薄钢板都用此法轧制。有粗轧和精轧两工序,最初在单架二辊机上进行,以后分别在两架轧机上进行。也有用一架三辊劳特式轧机进行粗轧，产品供给两架二辊轧机精轧。叠轧法可生产厚0.28～2.0mm，宽750～1000mm，长1500～2000mm的热轧薄钢板，也可生产厚2～4mm热轧钢板。产品主要有屋面板、酸洗板、镀锌板、搪瓷用钢板、油桶用薄板和硅钢片；此法也可生产不锈耐酸钢板和耐热钢板等。
叠轧薄板生产规模小，投资少，建设快；轧机的结构简单，为下辊单辊传动，不用齿轮机座。但缺点很多，高温叠轧容易产生叠层间粘结，废品量大；轧速?停仍《淙纯欤植荒芏栽踅欣淙矗徊捎梦露仍?400～500℃的热辊轧制，使生产难于准确控制，轧辊消耗量也很大；轧辊轴承需用沥青润滑，油烟很大，污染环境。此外，劳动生产率低，劳动强度高，操作条件恶劣；金属切损和烧损高，产品质量和尺寸精度低。一些工业发达国家已不再采用此法（见带钢热轧）。
参考书目
东北工学院轧钢教研室：《叠轧薄板生产》，冶金工业出版社，北京，1977.
叠轧薄板生产规模小，投资少，建设快；轧机的结构简单，为下辊单辊传动，不用齿轮机座。但缺点很多，高温叠轧容易产生叠层间粘结，废品量大；轧速?停仍《淙纯欤植荒芏栽踅欣淙矗徊捎梦露仍?400～500℃的热辊轧制，使生产难于准确控制，轧辊消耗量也很大；轧辊轴承需用沥青润滑，油烟很大，污染环境。此外，劳动生产率低，劳动强度高，操作条件恶劣；金属切损和烧损高，产品质量和尺寸精度低。一些工业发达国家已不再采用此法（见带钢热轧）。
参考书目
东北工学院轧钢教研室：《叠轧薄板生产》，冶金工业出版社，北京，1977.
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条