1) PV rolling
全异步轧制
1.
The paper discusses q_h and q_H relations between any two passes in the one-stand-tandem mill,and proposes a way to calculate any pass’s P(x),P,h_c and h_b(or h_H)on Pv rolling,IPV rolling and normal rolling.
本文提出了单机多道次异步连轧机各道次间前、后张力ｑ＿ｈ、ｑ＿Ｈ的关系式和计算各道次在全异步轧制（ＰＶ轧制）、不完全异步轧制（ＩＰＶ轧制）或普通轧制（Ｎｏｒｍａｌ轧制）时单位压力、轧制力、中性面高的方法，并以汤氏３５０单机三道次异步连轧机为例，用计算机辅助设计的方法计算了其各道次的力参数。
2) IPV rolling
不完全异步轧制
1.
The paper discusses q_h and q_H relations between any two passes in the one-stand-tandem mill,and proposes a way to calculate any pass’s P(x),P,h_c and h_b(or h_H)on Pv rolling,IPV rolling and normal rolling.
本文提出了单机多道次异步连轧机各道次间前、后张力ｑ＿ｈ、ｑ＿Ｈ的关系式和计算各道次在全异步轧制（ＰＶ轧制）、不完全异步轧制（ＩＰＶ轧制）或普通轧制（Ｎｏｒｍａｌ轧制）时单位压力、轧制力、中性面高的方法，并以汤氏３５０单机三道次异步连轧机为例，用计算机辅助设计的方法计算了其各道次的力参数。
3) differential speed rolling
异步轧制
1.
Research on drawability of AZ31 magnesium alloy sheet processed by differential speed rolling at room temperature;
异步轧制AZ31镁合金板材室温冲压性能研究
2.
Microstructure of AZ31 magnesium alloy sheets processed by differential speed rolling;
异步轧制AZ31镁合金板材组织
3.
The objective of this study on microstructure and grain orientation of AZ31 magnesium alloy sheets produced by differential speed rolling was to investigate the possibility of improving deformability of AZ31 magnesium alloy sheets.
主要对异步轧制AZ31镁合金板材的显微组织和晶粒取向进行了研究,以探讨提高镁合金板材塑性变形能力的途径。
4) asymmetric rolling
异步轧制
1.
It is revealed that the cold rolling texture is composed of strong incomplete α(〈110〉∥RD) fiber and relatively weak complete γ fiber(〈111〉∥ND) no matter what rolling schedule is taken on,but asymmetric rolling affects greatly the textural strength and its distribution along thickness.
研究了同步和异步轧制下无取向硅钢的冷轧织构及其沿层厚的分布特征。
2.
By means of analyzing four high mill for its rolling torque,this paper has established a structrural modle that suit to calculate the rolling torque of cold strip mill drived through back-up rolls in asymmetric rolling.
用辊系力矩分析法，建立了支持辊传动四辊冷轧机异步轧制轧制力矩的理论计算结构式，并对异步冷轧轧制力矩特性进行了生产实验分析，为异步工艺在冷轧带钢生产中的应用提供了理论及实验依据。
3.
This paper is to research the thickness distribution across the strip and it's re-lationship with roll's thermal crown in asymmetric rolling.
从而为将异步轧制工艺应用于冷轧窄带钢生产提供了完整的实测数据资料和实用工程计算软件。
5) Asynchronous Rolling
异步轧制
1.
Microstructure and Properties Evolution of Asynchronous Rolling AZ31 Magnesium Alloy Sheets during Annealing
异步轧制AZ31镁合金板材在退火处理中的组织性能演变
2.
The magnetic rariance is studied of different thiclcness two crystallization grain-oriented silicon steel finished product, underasynchronous rolling condition, the relationship is found between the tnagnetic and finished products thickness and asynchronous speed ratio of the grain oriented silicon steels.
研究了异步轧制条件下不同厚度的二次再结晶取向硅钢成品的磁性能的变化,找到了硅钢磁性能与成品厚度和异步速比之间的关系。
3.
The results indicated that the asynchronous rolling is effective to decrease rolling passes and improve the rolled texture and magnetic properties of thin silicon steel sheets.
结果表明 :异步轧制可有效地减少轧制道次 ,并有利于改善硅钢薄带的织构和磁性
6) cross shear rolling
异步轧制
1.
Evolution of texture of the AZ31 magnesium alloy by the cross shear rolling at room temperature;
AZ31镁合金室温异步轧制的织构演变
2.
Effect of the cross shear rolling technological parameters on tertiary recrystallization of ultra - thin silicon steel strips;
异步轧制对硅钢极薄带三次再结晶的影响
3.
Effect of reduction on textures of high purity aluminum foils after cross shear rolling;
冷轧形变量对异步轧制高纯铝箔织构的影响
补充资料：异步轧制
不对称轧制(asymmetrical rolling)的一种，是利用上下轧辊线速度差来改变变形区中的变形条件，产生有利于轧制变形的工艺。这种工艺具有降低轧制压力和生产更薄、精度更高产品等优点，但有容易使轧机颤振等缺点。一般轧制过程中本来就有工作轧辊间线速度不等的现象，只是未被看作是异步轧制而已。如单辊传动的薄板轧机、三辊劳特式轧机以及其他各种辊径不同的轧机的轧制过程都具有异步轧制的特点。异步轧制工艺还未在实际生产中发挥作用，尚存在许多问题，仍在研究中。
参考书目
汤富麟：《钢铁》，Vol.14,No.6,1979。
朱泉：《钢铁》，Vol.15,No.6,1980。
吴隆华：《钢铁》，Vol.15,No.3,1980。
参考书目
汤富麟：《钢铁》，Vol.14,No.6,1979。
朱泉：《钢铁》，Vol.15,No.6,1980。
吴隆华：《钢铁》，Vol.15,No.3,1980。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条