1) Titanium and titanium alloy root canal post
钛及钛合金根管桩
1.
Titanium and titanium alloy root canal post had strong anti fracture force,excellent biocompatibility and corrosion resistance,and less elastic modulus than fiber post.
钛及钛合金根管桩具有优良的生物相容性、耐腐蚀性,弹性模量相对较小,抗折能力强;有相对的优越性。
2) titanium and its alloys
钛及钛合金
1.
A simultaneous determination of oxygen and hydrogen in titanium and its alloys on infrared absorption has been described,and the optimal conditions have been obtained.
叙述了用红外吸收法对钛及钛合金中氧和氢联合测定的方法,取得了测定的最佳条件。
2.
Anodizing coloring mechanism of titanium and its alloys was analyzed to make sure the relationship of fiun thickness and coloring power source, so that the technological method and current design parameters were deduced to keep the color consistence of bath production, which provided an available method for coloring of titanium and its alloys.
分析了钛及钛合金阳极氧化着色机理及色膜厚度与氧化着色电源之间的关系,得出了保证成批量着色颜色一致性的工艺方法及电流设计参数,为钛及钛合金着色的应用提供了一种可用的方法。
3.
However, the production and utilization of titanium and its alloys are limited for their high chemical activity at molten state.
钛及钛合金具有密度小、强度高、耐腐蚀等一系列优点,在航空航天、国防军事、民用轻工等领域均有广泛应用前景。
3) Ti and its alloy
钛及钛合金
1.
The determination of Zr, Ru, Pd, Hf, Cu, Y, V, Mo, Nb, Al, Co, Ni, Ta, Bi, Sn, Cr and Mn in Ti and its alloys have been studied using an atomic emisson spectrum spectroscopy.
采用发射光谱分析技术,研究了钛及钛合金中Zr,Ru,Pd,Hf,Cu,Y,V,Mo,Nb,Al,Co,Ni,Ta,Bi,Sn,Cr,Mn的光谱测定方法。
4) titanium and titanium alloy
钛及钛合金
1.
Discussion about specified residual elongation stress in the standard of titanium and titanium alloy;
钛及钛合金标准中规定残余伸长应力的探讨
2.
Preparation of metallographic specimen for titanium and titanium alloy used for surgical implants
外科植入物用钛及钛合金金相试样制作浅谈
3.
The paper introduces the possibility of application of the titanium and titanium alloy for wrought products of motorcar.
介绍了汽车中使用钛及钛合金各类加工材的可能性。
5) titanium and its alloy
钛及钛合金
1.
As the markets of aerospace for the thick titanium and its alloy plate are more and more of the increase,it is impossible to meet the requirements of aerospace industry for the traditional blaze incision,so the experiments of waterjet process for cutting thick titanium and its alloy plate were performed.
随着世界航空市场趋好,钛及钛合金中厚板的需求旺盛,采用传统的火焰切割方式切割钛及钛合金已无法满足航空工业的需求。
2.
The utilization factor of materials for powder metallurgy parts can reach 100%,it is the important way to reduce the production cost of titanium and its alloy parts.
钛及钛合金具有优良的综合力学性能,在航空航天、航海、化工等领域得到日益广泛的应用。
3.
To meet the demands of welding titanium and its alloy electrode in large size.
为了满足大尺寸钛及钛合金电极的焊接要求,宝钛集团有限公司依据等离子弧的压缩效应原理及电弧的稳定性原理,对从德国引进的钛及钛合金真空等离子焊箱枪体的阴极和喷嘴进行了技术改造。
6) Ti and Ti alloy
钛及钛合金
1.
The microstructure, properties and impact fracture toughness of welded joints of Ti and Ti alloy by using tungsten-argon arc welding were studied.
研究了钛及钛合金经钨极氩弧焊焊接接头的显微组织、力学性能和冲击断裂特征。
2.
Ti and Ti alloy were applied widely in airline and aerospace industry because of its excellent performance.
钛及钛合金由于其优良的性能被广泛应用于航空、航天等重要工业部门，同时钛对绝热剪切敏感，在高应变速率形变条件下易产生所谓的绝热剪切带，而关于绝热剪切带内的微观组织演化规律是人们研究的焦点。
补充资料：耐热铸造钛合金
分子式：
CAS号：
性质：使用温度超过400℃的铸造钛合金。这粉合金具有良好的高温强度、蠕变抗力及高温长期暴露后的热稳定性能，铸造工艺性能良好，没有严重的热裂倾向。它们有三种类型：第一类为近α钛合金，如Ti6Al5Zr 0.5Mo0.25Si和Ti5.5Al3.5Sn3Zr1Nb0.3Mo0.3Si合金；第二类为含钼的α-β钛合金，如Ti6Al2Sn4Mo2Zr，Ti4Al4Mo2Sn0.5Si和Ti6.5Al3.5Mo2Zr-0.3Si合金；第三类为结晶时形成难熔点质点的铸造钛合金，如Ti5Al5Mo2Sn0.02Ce合金。耐热铸造钛合金是航空航天工业重要的材料。
CAS号：
性质：使用温度超过400℃的铸造钛合金。这粉合金具有良好的高温强度、蠕变抗力及高温长期暴露后的热稳定性能，铸造工艺性能良好，没有严重的热裂倾向。它们有三种类型：第一类为近α钛合金，如Ti6Al5Zr 0.5Mo0.25Si和Ti5.5Al3.5Sn3Zr1Nb0.3Mo0.3Si合金；第二类为含钼的α-β钛合金，如Ti6Al2Sn4Mo2Zr，Ti4Al4Mo2Sn0.5Si和Ti6.5Al3.5Mo2Zr-0.3Si合金；第三类为结晶时形成难熔点质点的铸造钛合金，如Ti5Al5Mo2Sn0.02Ce合金。耐热铸造钛合金是航空航天工业重要的材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条