说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 脉冲硬质阳极氧化
1)  pulse hardening anodic oxidation
脉冲硬质阳极氧化
2)  pulsed anodic oxidation
脉冲阳极氧化
1.
GaAs/AlGaAs BA semiconductor lasers fabricated with pulsed anodic oxidation process;
脉冲阳极氧化工艺制作GaAs/AlGaAs宽条形半导体激光器
2.
InGaAsN triple-quantum-welt strain-compensated lasers grown by metal organic chemical vapor deposition were fabricated with pulsed anodic oxidation.
利用金属有机气相沉积(MOCVD)生长了 InGaAsN 量子阱半导体激光器材料,采用脉冲阳极氧化(PAO)技术制作了脊型波导半导体激光器。
3)  hard anodic oxidation
硬质阳极氧化
1.
Technological improvement of 2024 aluminum alloy hard anodic oxidation;
2024铝合金硬质阳极氧化工艺的改进
2.
So we have to improve the wear-resistance of the rotor by hard anodic oxidation.
在纺纱过程中,转杯处于高速旋转状态,纤维的摩擦、负压气流的冲刷以及部分杂质的侵蚀和人为的清洁工作,均能造成转杯内壁和凝棉槽表面的磨损,因此为提高转杯的耐磨性须对其进行硬质阳极氧化处理。
3.
Effects of additive, electrolyte temperature, current density and duty ratio on hardness, thickness and corrosion resistance of pulse hard anodic oxidation films on aluminum alloys were studied, and the optimal process conditions were determined by means of orthogonal experiments.
 采用正交试验研究了添加剂、电解液温度、电流密度、占空比等对常温脉冲硬质阳极氧化膜硬度、厚度及耐腐蚀性的影响,确定了最佳工艺条件。
4)  hard anodizing
硬质阳极氧化
1.
Study of a rapid hard anodizing process for aluminium alloy under high currents;
大电流下铝合金快速硬质阳极氧化工艺的研究
2.
A new process of aluminum hard anodizing;
铝硬质阳极氧化新工艺的研究
3.
A composite hard-anodized coating containing micro PTFE (polytetrafluoroethylene) particles on aluminium alloy 6063 was produced by adding micro PTFE particles into the traditional hard anodizing solution.
在常规铝合金硬质阳极氧化液中添加聚四氟乙烯颗粒,在6063铝合金表面形成含有聚四氟乙烯颗粒的复合硬质阳极氧化层。
5)  Hard anodic oxidation film
硬质阳极氧化膜
1.
Characters,mechanics of film forming,applied range,growth conditions of hard anodic oxidation film were simply described.
首先简单的介绍了铝及铝合金的基本性质、6×××系铝合金的基本性质、6061合金的基本性质、硬质阳极氧化快速成膜技术,概括了硬质阳极氧化膜的特点、成膜机理、应该范围、以及硬质膜的生长条件。
6)  hard anodize
硬质阳极氧化处理
1.
Comprehensive description is done to problems in process of hard anodize for the spinning basket regarding the rotor cup,opening roller and twist stopper.
详述了对转杯纺纺纱器主要组件中转杯、分梳辊、阻捻头进行硬质阳极氧化处理存在的问题 ,介绍了新型化学镀镍处理工艺及配方 ,说明新工艺可不同程度提高上述三大件的使用寿命并改善成纱质量。
补充资料:脉冲
1.指电流或电压短暂的起伏变化。各种高频脉冲广泛用在无线电技术中。 2.指变化规律类似电脉冲的现象。如脉冲激光器。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条