说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 瓷质阳极氧化
1)  Porcelain anodic oxidation
瓷质阳极氧化
1.
The milk white and wear resistant oxide film wasobtained by the method of porcelain anodic oxidation after hot-dip aluminizing on thestainless steel and Co-Cr alloy first in this thesis.
本文首次通过热浸镀铝后进行瓷质阳极氧化的方法在不锈钢和钴铬合金表面获得耐磨的乳白色氧化膜。
2)  Anodization for porcelain like film on aluminum
铝瓷质阳极氧化
3)  hard anodic oxidation
硬质阳极氧化
1.
Technological improvement of 2024 aluminum alloy hard anodic oxidation;
2024铝合金硬质阳极氧化工艺的改进
2.
So we have to improve the wear-resistance of the rotor by hard anodic oxidation.
在纺纱过程中,转杯处于高速旋转状态,纤维的摩擦、负压气流的冲刷以及部分杂质的侵蚀和人为的清洁工作,均能造成转杯内壁和凝棉槽表面的磨损,因此为提高转杯的耐磨性须对其进行硬质阳极氧化处理。
3.
Effects of additive, electrolyte temperature, current density and duty ratio on hardness, thickness and corrosion resistance of pulse hard anodic oxidation films on aluminum alloys were studied, and the optimal process conditions were determined by means of orthogonal experiments.
 采用正交试验研究了添加剂、电解液温度、电流密度、占空比等对常温脉冲硬质阳极氧化膜硬度、厚度及耐腐蚀性的影响,确定了最佳工艺条件。
4)  hard anodizing
硬质阳极氧化
1.
Study of a rapid hard anodizing process for aluminium alloy under high currents;
大电流下铝合金快速硬质阳极氧化工艺的研究
2.
A new process of aluminum hard anodizing;
铝硬质阳极氧化新工艺的研究
3.
A composite hard-anodized coating containing micro PTFE (polytetrafluoroethylene) particles on aluminium alloy 6063 was produced by adding micro PTFE particles into the traditional hard anodizing solution.
在常规铝合金硬质阳极氧化液中添加聚四氟乙烯颗粒,在6063铝合金表面形成含有聚四氟乙烯颗粒的复合硬质阳极氧化层。
5)  Hard anodic oxidation film
硬质阳极氧化膜
1.
Characters,mechanics of film forming,applied range,growth conditions of hard anodic oxidation film were simply described.
首先简单的介绍了铝及铝合金的基本性质、6×××系铝合金的基本性质、6061合金的基本性质、硬质阳极氧化快速成膜技术,概括了硬质阳极氧化膜的特点、成膜机理、应该范围、以及硬质膜的生长条件。
6)  anodized dielectric film
阳极氧化介质膜
补充资料:瓷质阳极氧化
分子式:
CAS号:

性质:又称仿釉阳极氧化(glaze imitation anodizing)。所获得的铝氧化膜为浅灰白色,不透明,外观和搪瓷釉层相似。膜层致密(10~15μm),有较高的硬度、耐磨性、良好的绝热性和电绝缘性。膜有吸附性,能染各种颜色,可用于各种仪表、电子仪器零件表面的防护和日用品、食品用具的表面装饰。瓷质氧化膜可用草酸钛钾法和铬酸硼酸法获得。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条