1) PAA/U
聚丙烯酸钠/尿素
1.
Preparation and Moisture Absorption Properties of PAA/U Porous Material
聚丙烯酸钠/尿素多孔材料的制备与吸湿性能
2) sodium polyacrylate
聚丙烯酸钠
1.
Study of sodium polyacrylate with high hygroscopicity resin;
聚丙烯酸钠类高吸水性树脂的研究
2.
Synthesis of sodium polyacrylate hyper-dispersant and its dispersion performance;
聚丙烯酸钠超分散剂的合成及其分散性能研究
3.
Application of sodium polyacrylate to DP finish of cotton fabric with fibroin;
聚丙烯酸钠在棉织物丝素防皱整理中的应用
3) polyacrylate sodium
聚丙烯酸钠
1.
Study on synthesis of low-molecular weight polyacrylate sodium;
低分子量聚丙烯酸钠的合成
2.
Polymerization kinetics of high molecular weight polyacrylate sodium;
高分子量聚丙烯酸钠聚合动力学的研究
3.
Effect of the degree of carboxyl neutralization on the dispersivity of polyacrylate sodium;
羧基中和程度对聚丙烯酸钠分散性能的影响
4) poly(sodium acrylate)
聚丙烯酸钠
1.
High water-absorbing poly(sodium acrylate) resin;
高吸水性聚丙烯酸钠树脂
2.
The maleic anhydride-acrylic acid copolymer(MA-AA) has good anti-resoiling performance,and the poly(sodium acrylate)(PAAS) has quite strong Ca2+ and Mg2+ chelating ability.
马来酸酐/丙烯酸共聚物(MA-AA)有较好的抗再沾污性能,聚丙烯酸钠(PAAS)具有较强的螯合Ca2+、Mg2+的能力,将这2种羧酸类聚合物进行复配,形成了一种既有较好净洗能力,又有较强抗沾色能力的皂洗剂,且易生物降解,是一种环保型的纺织助剂。
3.
Acrylic acid was polymerized by radiation of ()~(60)Co to synthesized high water absorbent crosslinking poly(sodium acrylate).
利用 6 0 Co辐照引发丙烯酸钠聚合 ,制得高强吸水剂交联聚丙烯酸钠。
5) polyacrylic acid sodium
聚丙烯酸钠
1.
This paper expounds that synthesis of high water-absorbent poly(polyacrylic acid sodium/attapulgite) was made through liquor polymerization.
采用水溶液聚合法合成凹凸棒土-聚丙烯酸钠高吸水性复合树脂。
2.
The results shows that the molecular weight of polyacrylic acid sodium is affected seriously by the monomer concentration, reaction temperature,and reaction time, and polyacrylic acid sodium with relative low molecular weight can be gained by controlling these reaction conditions.
以水为溶剂,过硫酸铵-亚硫酸钠(APS-SHS)为引发体系,合成了系列聚丙烯酸钠(PAANa),探讨了聚丙烯酸钠分子量的影响因素。
3.
The super absorbent complex resin of polyacrylic acid sodium salt,which was synthesized by means of inverse suspension polymerization,was modified in the present of kaolin and cross-linking agent in the organic solvent consisting of water.
采用反相悬浮聚合法合成聚丙烯酸钠，调节油水两相体积比，添加高岭土和交联剂进行反应，制得高吸水性复合树脂。
6) polyacrylic sodium
聚丙烯酸钠
1.
Primary study of preparation of polyacrylic sodium composite ultrafiltration membrane (Ⅰ) Preparation of UPANA-1 composite membrane;
聚丙烯酸钠复合超滤膜研制初探 (Ⅰ)UPANA-1复合膜的制备
2.
Preparation and separating performance of polyacrylic sodium charged membrane;
聚丙烯酸钠荷负电膜的制备及分离特性研究
补充资料：聚丙烯酸钠
聚丙烯酸钠简称PAANa，结构式为[－CH2－CH(COONa)]n－。是—种水溶性树脂，分子量数百万，无色或淡黄色粘稠液体，呈弱碱性，能电离，有腐蚀性。在PH＝4附近时，容易凝胶；在PH＝2．5时，近于溶解。易溶于氢氧化钠水溶液，但在氢氧化钙、氢氧化镁等水溶液中会沉淀。无毒。
用作水基胶粘剂的增稠剂。贮存于阴凉、干燥的库房内。
用作水基胶粘剂的增稠剂。贮存于阴凉、干燥的库房内。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条