1) deformation review of structure
结构变形验算
1.
Design of the project including formation of the structure system, Calculation analysis of the 3D structure model and deformation review of structure under maximum earthquake action are introduced in this paper.
文章系统介绍了工程的设计内容,包括结构体系的形成,整体计算分析,罕遇地震下结构变形验算等。
2) structural checking computation
结构验算
1.
This paper is taking the Shenzhen city Bilinghuating project as example, have introduced in the hang scaffolding structure design, body structural checking computation and body put up to set up acceptance and use.
结合实例 ,详细介绍了悬挑脚手架架体构造设计、架体结构验算、架体搭设验收与使用。
3) check computations of deformation
变形验算
1.
Discussion on the check computations of deformation of frail layer of frame structure in high vibration areas;
高震区框架结构的薄弱层变形验算
4) structural deformation
结构变形
1.
However,the stress sensitivity of reservoir rocks caused by structural deformation is quite strong,which can not only reduce the production rate of reservoir,.
储层岩石存在本体变形和结构变形2种变形方式。
2.
For the sake of researching the influence of structural deformation on large-scaled 6-dimensioned force sensor,the measurement error model of Stewart platform 6-dimensioned force sensor under the condition of considering the deformation of the whole structure was established by dint of posture solution based on spiral theory and affecting coefficients method.
为了研究结构变形对大型六维力传感器精度的影响,基于螺旋理论及影响系数方法,并借助位姿解建立了考虑结构整体变形条件下Stewart平台六维力传感器测量误差模型,推导出并联六维力传感器测量的I,II类误差表达式,分析了在不同外载下,六维力传感器Ⅰ,Ⅱ类误差,总结了结构变形和平台自重对传感器测量精度的影响规律,为具有普通球形铰链大型Stewart平台六维力传感器标定方案的选择和精度的改善提供了理论基础。
3.
It is to calculate the structural deformations of the different curve radiuses under the constant loading action by the parameter variation process.
采用结构有限元计算方法,以一座斜交弯梁桥为工程背景,利用大型通用软件ANSYS,建立斜交弯梁桥模型,采用参数变异法,计算在恒载作用下不同曲线半径的结构变形情况。
5) deformation structure
变形结构
1.
The deformation structure in Ti-25V-15Cr-2Al-2Mo-0.
2C合金在540℃,250 MPa,100 h蠕变作用后的变形结构。
6) structure deformation
结构变形
1.
Effects of structure deformations of wheelset/track on driving torque applied to a single wheelset of high speed locomotive;
轮轨结构变形对高速机车单轮对牵引力矩的影响
2.
Structure Deformation Cause Analysis and Optimization Study on Automotive Complicated Injection Part
汽车复杂注塑件结构变形原因分析与优化研究
3.
The author puts forward a concept to think about thoroughly the belt tension and the influence of installing abase to the deformation of the truss bridge caused by internal forces and structure,an economical and useful structure plan was made to meet the requirement of structure deformation on the premise of using fully the strength of the material.
提出应充分考虑胶带张力及设置斜支架后对栈桥桁架内力变形和构造的影响 ,在充分利用材料强度的前提下作出了满足结构变形要求的经济合理的结构方案。
补充资料:验算
1.检查运算的结果有无差错。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条