2) eccentric patch loading
小片荷载偏心作用
1.
Based on the latest experimental study,the load carrying capacity of the thin-walled steel I-girders subjected to eccentric patch loading has been analyzed.
引用国外最新的试验研究,对薄壁工字形钢梁在小片荷载偏心作用下的承载力问题进行了研究。
2.
Because of the highly concentrated loading and eccentric loading, it is difficult to predict the failure mode and the ultimate bearing capacity when the thin-walled steel I-girders are subjected to eccentric patch loading.
薄壁工字形钢梁在小片荷载偏心作用下,由于荷载的局部高度集中,再加上本身加载有偏心,其破坏模式和承载力的估计是一个很复杂的问题。
3) blade load
叶片载荷
4) small load
小幅载荷
1.
The effect of small loads superposed upon principal cyclic load ?P on the fatigue crack growth rate da/dN has been studied for A537 steel in 3.
５％ＮａＣｌ水溶液中，阳极溶解条件下以不同方式叠加在主载荷ΔＰ上的小幅载荷对疲劳裂纹扩展ｄａ／ｄＮ～ΔＫ曲线的影响，并与空气中的结果进行比较，讨论了阳极溶解影响小幅载荷行为的机理。
2.
The influence of small loads superposed upon principal cyclic load △P on the fatigue crack growth rate da/ dN has been studied for the single edge notched plate specimens of A537 steel, and the crack closure behaviour has been investgated by measurement of crack opening displacement with speckle interferometry(SPI) technique.
采用Ａ５３７钢单边缺口试样，研究了以不同方式叠加在主载荷△Ｐ上的小幅载荷在疲劳裂纹扩展过程中的作用，并采用激光散斑技术测量了循环加载过程中的裂纹闭合效应。
5) small load
小载荷
1.
A new small load testing machine for impact wear was designed and made.
设计并研制出新型小载荷冲击磨损试验机,介绍了该试验机的工作原理、结构及其主要技术参数,并采用所研制的试验机对TC4钛合金进行了8个不同周次的3组冲击磨损试验。
2.
A small load sliding reciprocating friction tester was developed and its principle and structure was described.
描述了自行研制的小载荷下滑动往复摩擦测试平台的工作原理。
6) carrying vehicle
载荷小车
补充资料：在AutoCAD中偏心圆锥与偏心圆台实体的画法
现在要画一个偏心圆锥,底面在WCS的XY平面上,圆心(0,0,0),半径100,顶点(300,0,400)在ZX平面上.
1)连接PA,PB. A(-100,0,0) B(100,0,0)
图1
在当前坐标下:
2)延长PA到C,使PA=CA;延长PB到D,使PB=DB;
3)连接CD;
4)以CD为直径画圆;
5)用XLINE命令中的二等分选项作角CPD的角平分线PO,交CD于O;
6)过O作CD的垂线,交圆于E,F;
图2
7)用三点UCS命令,取三点为:O,P,C;
8)过点O作PO的垂线GO,交PC于G;
图3
9)再次用三点UCS命令,取三点为O,F,G;
10)现在就可以画椭圆锥了!
cone-e-c-捕捉O点-捕捉F点-捕捉G点-a-捕捉P点;
图4
11)回到WCS,剖切椭圆锥
SL-选择椭圆锥-回车-XY-回车-捕捉P点.
12)删除辅助线条.
图5
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条