1) intermediate slab blank thickness
中间坯厚度
2) Medium thick continuously cast slabs
中等厚度连铸坯
3) medium thickness slab
中等厚度板坯
1.
The general situation of medium thickness slab continuous casting and rolling process in the world is simply introduced and some ideas are analyze
概述了目前世界中等厚度板坯连铸连轧生产线建设情况及其特点 ,提出了一些分析意
4) intermediate thickness
中间厚度
1.
With consideration of characteristics of cold rolling,the original nonlinear load model is adopted with Powell optimization to realize on-line optimization of intermediate thickness ste-up without reduction of calculation precision.
为了提高冷连轧过程中轧制稳定性与模型计算精度,以宝钢1220五机架冷连轧机为研究对象,充分考虑到冷连轧过程的生产工艺特点,直接采用原始非线性负荷模型,在不做任何有损计算精度的数学简化的前提下,利用powell优化方法实现冷连轧过程中间厚度在线优化设定,不但提高了计算速度与计算精度,而且解决了计算过程中不收敛的问题,杜绝现场因模型问题而造成意外停机事故的发生,具有进一步推广应用的价值。
2.
A model of calculating strip steel intermediate thickness in the load-quick-set cold continuous rolling was established by using the coherent principle of Newton iteration method,which was applied in on the 1220mm five-stand cold tandem mill in Bao Steel tandem cold mill strip thin co.
在利用泰劳级数展开并忽略高次项将相关非线性问题简化为线性问题的数学处理方法基础上,采用牛顿迭代法的相关原理,提出了1套适合冷连轧机快速负荷设定的带材中间厚度计算模型。
5) wide and thick slab continuous casting tundish
宽厚板坯连铸中间罐
1.
Characteristics analysis of molten steel flow in a wide and thick slab continuous casting tundish;
宽厚板坯连铸中间罐内钢液流动特性分析
6) Shell thickness
坯壳厚度
1.
The solidified shell thickness of Jigang slab caster is measured by nail-shooting technology,and the measuring results are compared with theoretical calculation values.
采用射钉法测量济钢大板坯连铸机坯壳厚度,将实测结果与理论计算的结果进行对比,修正了综合凝固系数,指导改造了二冷喷嘴的结构,加强了铸坯冷却强度,年铸坯产量达225万t。
2.
The application of nail-shooting technique in the shell thickness measuring was introduced.
介绍了射钉法在测量连铸坯凝固坯壳厚度方面的应用情况。
3.
Unsteady temperature distribution and shell thickness in the continuous casting bloom were numerically simulated.
利用数值模拟手段计算连铸方坯中非稳态温度场分布及坯壳厚度,根据所需的凝固分率所对应的坯壳厚度点来预报轻压下设备的轻压下位置。
补充资料：中间
1.两者(人或地﹑时﹑物)之间;当中。 2.介绍。 3.里面。 4.房屋内居中的房间。 5.犹言之间或"在……过程中"。表时态。 6.指中间派。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条