1) hygrothermal stress
湿热残余应力
1.
Testing and characterization of hygrothermal stresses in carbon-fibers reinforced epoxy composites using Raman spectroscopy
碳纤维增强环氧树脂基复合材料湿热残余应力的微Raman光谱测试表征
2) thermal residual stresses
热残余应力
1.
Effect of Ti interlayer on thermal residual stresses of CVD diamond films;
钛过渡层对CVD金刚石膜热残余应力的影响
2.
Based on this model,the distributions of thermal residual stress components in diamond thick films(40mm×1mm) and at interface between the films and Mo substrate were simulated comprehensively,and the influence of thermal residual stresses upon the films′ failure was analyzed.
运用ANSYS软件建立了三维轴对称有限元模型,对金刚石厚膜(ф40mm×1mm)内部和膜/钼基体界面处的热残余应力各个分量的分布作了全面的模拟,讨论了热残余应力对金刚石厚膜失效的影响。
3.
This paper summarizes the analysis methods of the thermal residual stresses in the metal matrix composite (MMC) at the present, and analyzes the effect on the structure and mechanical properties of the thermal residual stresses in MMC.
对目前金属基复合材料热残余应力的分析方法进行了概述,并对热残余应力对金属基复合材料的性能影响进行了分析,提出了目前在复合材料热残余应力的实验分析和理论计算中仍存在的问题以供材料科学工作者共同研究解决。
3) residual thermal stress
残余热应力
1.
Finite element analysis of the residual thermal stress of discal SiC/C functionally graded material;
圆板状SiC/C功能梯度材料残余热应力特征有限元分析
2.
Finite element analysis of residual thermal stress in different interracial shape and structure of coatings;
不同界面形状及结构的涂层残余热应力的有限元分析
3.
With the analysis of stress intensity factor near the crack tip of the cracked metallic panel,the influence of residual thermal stress on repairing cracked metallic panel with composite patch bonded is investigated.
本文建立了复合材料胶接修理金属裂纹板的三板有限元模型;采用分析金属裂纹板裂纹尖端应力强度因子的方法,分析了残余热应力对复合材料修理金属裂纹板修理效果的影响。
4) residual stress
残余热应力
1.
Commercial FEM program LS-DYNA has been used to do the simulation of thermal residual stress in H-beam,with the thermal mechanical coupled method and the whole rolling process simulation result used as the initial thermal field.
借助于LS-DYNA仿真软件,在H型钢轧制全程的热力耦合仿真分析结果的基础上,完成了对轧后H型钢翼缘外侧强制冷却及改善终轧H型钢断面温度分布情况下的H型钢残余热应力状态的三维热力耦合仿真分析。
5) Thermal residual stress
热残余应力
1.
Effect of particle on thermal residual stress in aluminum matrix composite
颗粒对铝基复合材料热残余应力的影响
2.
The distribution of thermal residual stresses in δ Al 2O 3 f /Al alloy composites and the effects of thermal residual stresses on the properties of the composites were calculated with a double fiber model and elasto plastic finite element method.
用弹塑性有限元法和双纤维模型研究了δAl2O3 短纤维增强Al合金复合材料在室温下的热残余应力的分布及其对复合材料整体力学性能的影响。
3.
The varying principle of thermal stress in the SiC_P/2024Al composites under different heat treatments and the effect of heat treatment on the thermal residual stress are investigated.
为研究热处理过程中SiCP/2024Al复合材料的热应力的变化规律,及热处理工艺对SiCP/2024Al复合材料热残余应力的影响,利用Marc有限元软件对淬火和冷热循环热处理过程中的SiCP/2024Al复合材料的热应力进行了数值模拟。
补充资料：湿热
湿热 湿热 ①病因学名词。指病邪。湿和热相结合的病邪。致病可分别引致脾胃、肝胆及下焦大肠、膀胱等脏腑或皮肤筋脉的病证。《素问·生气通天论》：“湿热不攘，大筋软短，小筋弛长，软短为拘，弛长为痿。” ②病证名。吴坤安于《伤寒指掌》卷四中描述此证：“脉濡细而数，发热身痛，小水短涩；或身目俱黄，属湿热。宜五苓散加生栀、黄柏、茵陈、秦艽。”
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条