1) dynamic indirect tensile test
动态间接拉伸试验
1.
The parameters of six asphalt mixtures were measured in dynamic indirect tensile test at the temperatures of 5℃,10℃,15℃ and 20℃ by employing multi-functional asphalt materials test machine imported from England.
利用英国多功能气动沥青材料试验机CooperNU-14测定了6种沥青混合料在5、10、15和20℃时的动态间接拉伸试验参数,用二次多项式对试验结果进行了拟合,重点分析了试验温度对动态间接拉伸试验参数的影响。
2) dynamic indirect tensile stiffness modulus test
动态间接拉伸劲度模量试验
1.
Employing multi-functional asphalt materials test machine imported from England,the dynamic indirect tensile stiffness modulus test parameters of original asphalt mixture、short-term aged asphalt mixture and long-term aged asphalt mixture were measured.
利用英国多功能气动沥青材料试验机Cooper NU—14测定了4种沥青混合料老化前、短期老化和长期老化后试件的动态间接拉伸劲度模量试验参数,分析了影响沥青混合料抗老化性能的相关因素。
3) indirect tensile test
间接拉伸试验
1.
A digital image processing system instead of the traditional displacement sensor data acquisition system was used to the indirect tensile test of asphalt mixtures,and their displacement field and damage form in meso-structure were recorded.
将数字图像测量系统替代传统的位移传感器采集系统应用于间接拉伸试验,得到沥青混凝土细观结构上的位移场分布和破坏形态。
2.
The changing law of Poisson\'s ratio of asphalt mixtures was obtained and analyzed by comparing the results of two measuring methods based on indirect tensile test and uniaxial compression test.
为探讨沥青混合料泊松比的变化规律,运用基于间接拉伸试验和单轴压缩试验两种试验方法对沥青混合料泊松比进行了测定对比分析,提出了间接拉伸试验更适合于沥青混合料泊松比测定的观点。
4) indirect tensile fatigue test
间接拉伸疲劳试验
1.
Firstly different fatigue testing methods of HMA are summarized,the scope of applicability of two kinds of control mode are analyzed,and it is recommended that indirect tensile fatigue test with stress control mode be used.
首先总结分析了沥青混合料不同疲劳试验方法的特点、两种疲劳试验控制模式的适用范围,建议采用应力控制模式的间接拉伸疲劳试验方法。
5) Uniaxial tensile test
直接拉伸试验
1.
Uniaxial tensile test is the only test method to verify a cementitious composite is strain hardening or not.
配制了23组应变硬化水泥基复合材料,利用改进的直接拉伸试验方法测试其直接拉伸性能,并依此判定属于UHTCC的配比。
2.
A modified uniaxial tensile test method is presented for ultra-high toughness cementitious composites(UHTCC).
对已有应变硬化水泥基复合材料薄板型试件的直接拉伸试验方法进行改进,并利用改进后的测试方法研究超高韧性水泥基复合材料(Ultra High Toughness Cementitious Composite,简称UHTCC)的受拉性能,通过试验系统地给出利用国产基体原材料配制的超高韧性水泥基复合材料的直接拉伸特性,具体包括直接拉伸应力-应变曲线和极限裂缝宽度等特征指标。
6) quasi-tensile test
准静态拉伸试验
1.
The work hardening behavior of Inconel 718 at the room temperature is studied by quasi-tensile test.
采用准静态拉伸试验方法研究Inconel718合金的加工硬化特性。
补充资料：动态
①（事情）变化发展的情况：科技～ㄧ从这些图片里可以看出我国建设的～。②艺术形象表现出的活动神态：画中人物，～各异，栩栩如生。③运动变化状态的或从运动变化状态考察的：～工作点ㄧ～电流ㄧ～分析。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条