1) spreading amount
展宽量
1.
The theoretical expressions of the offsets and spreading amount of each phase modulation items are derived.
在对运动目标距离像相位调制因子的物理意义深入理解的基础上,利用驻定相位原理得到了运动目标距离像的峰值位置和目标初始位置、速度、加速度的解析关系;对径向运动引起的二次相位干扰项、三次相位干扰项对距离像的影响给出了更准确的理解,详细给出了各调制项对应的偏移量和展宽量的理论表达式;通过分离各相位调制项的方法,实验验证了理论推导的正确性。
2) widthwise elongation
宽展量
1.
With statistical analysis of widthwise elongation of molybdenum sheet of width >600 mm in production process,the influence of the roll neck,the rolling path,the billet size and other factors on sheet widthwise elongation is studed.
通过对宽度大于600 mm钼板在生产过程中的宽展量进行统计分析,验证了宽展量受辊径、轧制道次、坯料尺寸等因素的影响。
3) Pressure broadening measurement
压致展宽测量
4) energy spread function
能量展宽函数
1.
Objective:To derive the energy spread function of the electron pencil beam model from the measured beam profiles.
目的:探讨用离轴比曲线分析电子束照射野笔形束模型能量展宽函数的方法。
5) width spread
宽展
1.
Application of Elman neural network to width spread prediction in medium plate mill;
Elman神经网络在中厚板轧机宽展预测中的应用
2.
According to the operating principle and actual work condition of D56G90 cold ring rolling mill,two major factors,feed speed and width-radius ratio,that affected the width spread in cold rolling rectangle cross-section ring were selected to design width-spread experiment.
根据D56G90型环件冷辗扩机的工作原理和实际工作情况,选取了影响矩形截面环件冷辗扩宽展的2种主要因素:进给速度和宽径比来设计研究宽展变化的实验方案。
3.
The distribution of specific rolling pressure, transverse stress, exit strip profile, edge drop and width spread are obtained by numerical calculations.
数值解析给出了单位轧制压力、出口断面形状、边部减薄及宽展等计算结果,且不同轧制条件下的计算实例与实际相吻合,表明所开发的三维程序适用于单机架或连轧机组等不同型式的宽、窄带钢轧制解析。
6) spread
[英][spred] [美][sprɛd]
宽展
1.
The fem simulation for the effect of spread on Q345B square billets rolled by adjusting waist obliquity in box pass;
箱形孔腰部倾角对轧制Q345B方坯宽展影响的有限元模拟
2.
Simulation study of strip spreading on 2050mm roughing trains of Bao Steel;
宝钢2050粗轧带钢宽展规律仿真研究
3.
The spread model of grooveless rolling of compact mill;
紧凑式轧机无孔型轧制轧件宽展模型的建立
补充资料：展宽
1.犹拓宽，扩展。 2.犹开阔。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条