1) cutting force and geometry angle
切削力与几何角度
1.
After the problems of cathode carbon block cutting tool,such as hardness,wear resistance,strength heat resistance,cutting force and geometry angle are analysed and discussed,and the effective way to improve cutting tool\'s life is searched,which can meet the technical requirement of cathode carbon block usage.
通过阴极炭块铣削刀具的硬度和耐磨性、强度和耐热性、切削力与几何角度等问题的分析探讨,寻找提高切削刀具耐用度的有效途径,满足阴极炭块使用技术要求。
2) geometry
[英][dʒi'ɔmətri] [美][dʒɪ'ɑmətrɪ]
几何角度
1.
Drills with indexable inserts are a kind of new and efficient tools for hole processing,a mathematical model for dynamic geometry analysis of them is developed using vector-matrix approach.
硬质合金可转位浅孔钻是一种新型、高效的孔加工刀具,本文作者采用向量矩阵法建立了可转位浅孔钻动态几何角度的数学模型,使用该模型可计算出浅孔钻在钻削加工过程中切削刃上各点的刃倾角、法前角、法后角及主偏角,为进一步研究可转位浅孔钻提供了必要的基础数据。
2.
A mathematical model for static geometry analysis of drills with indexable inserts is developed.
采用向量矩阵法建立了可转位浅孔钻静态几何角度的数学模型 ,使用该模型可计算出钻头切削刃各点的刃倾角、法前角、法后角及主偏角 ,为进一步研究可转位浅孔钻的钻削力、钻削温度、刀片磨损等提供必要的基础数据。
3) geometric angle
几何角度
1.
The geometric angle of the blades of cutting tools is one of the difficult (complex) concepts in teaching the theory of metal cutting and cutting tools.
刀具几何角度是金属切削原理及刀具课教学中的一大难点 。
2.
This paper presents an approach of geometric construction for indexable inserted form mills,which includes the modular structure design;the algorithm for profile height modification,the edge profile error evaluation and distribution of the geometric angles along the main cutting edges etc.
给出了可转位成形铣刀的几何造形方法 :它包括模块化的结构设计 ,廓形高度修正算法 ,刃形误差计算 ,几何角度沿主切削刃的分布情况
3.
The geometric angles of the ball end milling cutter with plane face are analyzed.
分析了平前刀面球头铣刀的几何角度，给出了该铣刀的刀刃参数方程，推导了铣刀法向前角、刃倾角和主偏角计算公式。
4) cutting force and cutting temperature measurement
切削力与切削温度测量
1.
The cutting force and cutting temperature measurement have been the very important experimental technology.
为快速方便准确的测量切削力和切削温度,本文开发了基于LabVIEW的切削力与切削温度测量的数据采集处理系统。
5) geometry cutting parameter
几何切削参数
6) cutting angle
切削角度
1.
Based on mathematical model of the rake surface of curved edge drills(CEDs) and the planar displaying method(PDM),images are established for the calculation of dynamic cutting angles at any point on the main edge of CEDs,which are measured in different reference systems and include the rake angle,the inclination angle and the cutting edge angle.
根据钻头前刀面的数学模型,应用平面表像法理论建立了计算曲线刃钻头主刃各点在不同参考系下的工作切削角度(包括工作前角、工作刃倾角、工作主偏角等)的像图。
2.
A universal model for calculating cutting angles from structural and grinding param.
以麻花钻前后刀面的数学模型为基础,建立了二次曲面后刀面麻花钻各几何要素的平面像图;应用平面表像法,将麻花钻上复杂的空间角度计算问题转化为平面上的非欧距离和非欧夹角的计算问题,从而大大简化了计算分析的难度;建立了麻花钻切削角度与结构和刃磨参数关系的统一计算模型,为麻花钻的结构和刃磨参数的分析和优化设计提供了一种新的建模方法。
3.
The technologies include the ruling methods, the adjusting of the cutting angle, the selecting for the knife tip angle of the diamond cutter and the choosing of the materials being ruled.
详细介绍了指纹采集仪用光栅在研制过程中,对原有光栅刻划机分度系统结构改造和重新设计,以及新的刻划工艺,它包括刻划方法、切削角度的调整、金刚石刀具刀尖夹角的确定和被刻划材料的选择。
补充资料：切削
1.用机床的刀具或砂轮削磨作件，使之具有一定形状﹑尺寸和表面光洁度。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条