说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 7075/SiCp复合材料
1)  7075/SiCp composite
7075/SiCp复合材料
1.
Large dimensional spray formed 7075/SiCp composite and extrusion billet were densified by cyclic pressing.
研究了多层喷射沉积大尺寸7075/SiCp复合材料的沉积坯和挤压坯两种坯料经过循环压制加工后SiC颗粒的分布,测试了复合材料循环压制后的力学性能,通过拉伸断口SEM形貌分析了复合材料的断裂行为。
2)  SiCp Composites
SiCp复合材料
3)  7075/15SiC_p aluminum matrix composite sheet
7075/15SiC_p铝基复合材料板材
4)  SiCp/LY12 composite
SiCp/LY12复合材料
1.
Resistance to plastic deformation (σp) in a range of 10~5~2×10~3 of plastic strain was investigated experimentally for a 35%SiCp/LY12 composite and its matrix alloy.
对SiCp/LY12复合材料及其基体LY12合金在10~(-5)~2×10~(-3)塑性应变范围内的塑变抗力进行了比较研究。
5)  SiCp/Al MMCs
SiCp/Al基复合材料
1.
In order to analyze the weldability of SiC particle reinforced aluminum metal matrix composites(SiCp/Al MMCs),plasma arc in-situ welding of SiCp/Al MMCs was carried out using argon-nitrogen mixture as plasma gas with Ti-Mg mixed powder as in-situ material.
为分析SiCp/Al基复合材料的焊接性,以Ti-Mg混合粉末作为填充材料,采用氮氩混合等离子气体对SiCp/Al基复合材料进行等离子弧原位焊接。
2.
Plasma arc "in-situ" welding of SiCp/Al MMCs were carried out using argon-nitrogen mixture as plasma gases with Ti-Ni alloying as "in-situ" material.
以Ti-Ni合金作为填加材料,采用氮氩混合等离子气对SiCp/Al基复合材料进行等离子弧原位焊接。
3.
In this paper,SiCp/Al MMCs were selected as research objects,and process and mechanism of SiCp/6061Al MMCs by plasma arc welding(Ar and N2 as ionized gas, Ar as fielded gas) were systematically studied.
研究表明填加Al-Si-Ti-Ni合金对SiCp/Al基复合材料进行等离子弧原位焊接,填加材料中Ti含量为5%时,可以有效抑制有害相Al_4C_3的生成,得到的焊缝组织较为致密,没有气孔、微观裂纹等缺陷,接头强度较之不加填充材料时有较大提高,达到226MPa,提高了接头的力学性能。
6)  SiCp/Al composites
SiCp/Al复合材料
1.
Preparation of high volume fraction SiCp/Al composites for electronic packaging;
电子封装用高体积分数SiCp/Al复合材料的制备
2.
Anti-corrosion properties of electroless nickel coating on SiCp/Al composites;
SiCp/Al复合材料化学镀镍耐蚀性研究
3.
An Application of Focusing Probe in SiCp/Al Composites′ Nondestructive Testing;
聚焦换能器在SiCp/Al复合材料超声无损检测中的应用
补充资料:[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式:C16H16ClN3O3S
分子量:365.5
CAS号:26807-65-8

性质:暂无

制备方法:暂无

用途:用于轻、中度原发性高血压。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条