1) SiCp/LD2 composite
SiCp/LD2复合材料
1.
The SiCp/LD2 composite was welded by using the continuous CO2 laser beam welding,and the microstructure of weld was investigated by means of OM,TEM,X-ray diffraction and EPMA.
用连续CO2激光焊焊接了SiCp/LD2复合材料,用光学显微镜和X射线衍射仪分析了焊缝组织,结果表明,在所用的热输入范围内,焊缝中均发生了界面反应,生成了针状Al4C3。
2) SiC_P/LD2 metal matrix composite
SiC_p/LD2复合材料
3) SiCw/LD2 composite
SiCw/LD2复合材料
1.
Melting kinetics of SiCw/LD2 composite;
SiCw/LD2复合材料的熔化动力学
5) SiCp/LY12 composite
SiCp/LY12复合材料
1.
Resistance to plastic deformation (σp) in a range of 10~5~2×10~3 of plastic strain was investigated experimentally for a 35%SiCp/LY12 composite and its matrix alloy.
对SiCp/LY12复合材料及其基体LY12合金在10~(-5)～2×10~(-3)塑性应变范围内的塑变抗力进行了比较研究。
6) SiCp/Al MMCs
SiCp/Al基复合材料
1.
In order to analyze the weldability of SiC particle reinforced aluminum metal matrix composites(SiCp/Al MMCs),plasma arc in-situ welding of SiCp/Al MMCs was carried out using argon-nitrogen mixture as plasma gas with Ti-Mg mixed powder as in-situ material.
为分析SiCp/Al基复合材料的焊接性,以Ti-Mg混合粉末作为填充材料,采用氮氩混合等离子气体对SiCp/Al基复合材料进行等离子弧原位焊接。
2.
Plasma arc "in-situ" welding of SiCp/Al MMCs were carried out using argon-nitrogen mixture as plasma gases with Ti-Ni alloying as "in-situ" material.
以Ti-Ni合金作为填加材料,采用氮氩混合等离子气对SiCp/Al基复合材料进行等离子弧原位焊接。
3.
In this paper,SiCp/Al MMCs were selected as research objects,and process and mechanism of SiCp/6061Al MMCs by plasma arc welding(Ar and N2 as ionized gas, Ar as fielded gas) were systematically studied.
研究表明填加Al-Si-Ti-Ni合金对SiCp/Al基复合材料进行等离子弧原位焊接,填加材料中Ti含量为5%时,可以有效抑制有害相Al_4C_3的生成,得到的焊缝组织较为致密,没有气孔、微观裂纹等缺陷,接头强度较之不加填充材料时有较大提高,达到226MPa,提高了接头的力学性能。
补充资料：mo(u)ld paper
分子式：
分子量：
CAS号：
性质：专供印刷工业铅印、浇铸字型用的纸板。纸质坚韧有力，厚度一致，收缩率小，具有高度的可塑性和有限的弹性，坚固耐久，并能耐270~300℃的高温，以保证压铸铅字时字型的稳定。用木浆、废纸等为原料，也有采用树皮纤维的，抄成薄纸，多张粘合，经热压后而成。激光照排推广后，此纸板已被淘汰。
分子量：
CAS号：
性质：专供印刷工业铅印、浇铸字型用的纸板。纸质坚韧有力，厚度一致，收缩率小，具有高度的可塑性和有限的弹性，坚固耐久，并能耐270~300℃的高温，以保证压铸铅字时字型的稳定。用木浆、废纸等为原料，也有采用树皮纤维的，抄成薄纸，多张粘合，经热压后而成。激光照排推广后，此纸板已被淘汰。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条