1) impregnation coprecipitation
浸渍共沉积
1.
Using cobalt salt,aluminum salt or titanium salt as modifying agent,the metallic ion doped silica gel adsorbents based on ceramic fiber are prepared by treating ceramic fiber paper with impregnation coprecipitation of water glass and aqueous solution of acidic metallic-salt sequentially.
采用浸渍共沉积法,以陶瓷纤维纸为基材,钴盐、铝盐或钛盐为改性剂,顺次经水玻璃、酸性盐溶液,制得了金属离子掺杂硅胶吸附剂。
2) immersion plating
浸渍沉积
1.
Utilizing regular patterned surface morphology and reducibility of silicon nanoporous pillar array(Si-NPA),Ag/Si-NPA composite nanosystems with three kinds of morphological characteristics were prepared by immersion plating method.
利用硅纳米孔柱阵列(Si-NPA)表面规则的图案化形貌和还原性,采用浸渍沉积技术制备了具有三种不同表面结构特征的Ag/Si-NPA复合纳米体系。
2.
Using regularly patterned silicon nanoporous pillar array (Si-NPA) prepared by hydrothermal etching method as substrate in this thesis, Ni/Si-NPA nanocomposite system with different surface morphologies has been synthesized by immersion plating method through changing Ni~(2+) concentration、pH value of concentration、different oxidation status on the surface of Si-NPA substrate、depositing time.
本文以水热腐蚀技术制备的具有规则表面形貌和结构的硅纳米孔柱阵列(Silicon Nanoporous Pillar Array，Si-NPA)为衬底，利用其表明活性通过浸渍沉积技术并调控溶液中Ni~(2+)浓度、溶液的pH值、采用具有不同表面氧化状况的Si-NPA衬底及改变沉积时间等条件，制备了具有不同图案化结构的镍／硅纳米孔柱阵列纳米复合体系。
3) coprecipitation and wet impregnation
共沉淀-浸渍法
1.
The solid surperacid SO42-/TiO2-Fe2O3 was prepared by the method of coprecipitation and wet impregnation.
采用共沉淀-浸渍法制备了SO42-/TiO2-Fe2O3固体超强酸催化剂,通过样品光催化降解酸性蓝染料,考察了制备条件对染料脱色率的影响。
4) coimpregnation
共浸渍
1.
An antisulfur CO shift catalyst was prepared from supporter of activated alumina, which was of our own make from a bauxide,by coimpregnation.
利用自制活性矿物载体［１］，采用共浸渍法，研制出用天然矿直接作载体的耐硫ＣＯ低变催化剂。
2.
The data of the experiment, the reaction constant of the coimpregnation and the Freundlich's adsorption isothermal equation in which the active components are adsorbed on to the carrier, have been obtained by the regresion analysis.
用自制活性载体，进行耐硫低变催化剂共浸渍条件的研究。
5) co impregnation
共浸渍法
1.
Three methods for preparing hydrotreating catalysts, such as dry mixing (DM), dry mixing followed by impregnation (DM I) and co impregnation (CI), were compared.
从实用的角度出发 ,比较了不同制备方法 (干混法、干混 浸渍法和共浸渍法 )对MoNiP/Al2 O3 催化剂性质的影响 。
6) isometric impregnation
等体积浸渍
1.
To research the experimental effect of rare-earth-oxide-loaded activated carbon fibers(ACF),the CeO2-loaded ACFs were prepared by isometric impregnation.
为考察负载稀土氧化物的活性炭纤维(ACF)催化净化NO的实验效果,采用等体积浸渍法制备了一系列负载CeO2的ACF负载型催化剂,在微型反应器中通过程序升温反应,利用正交实验考察了不同温度、不同负载量、不同氧气体积比以及不同空速下催化剂脱除NO的最佳催化净化效率。
补充资料：RFL浸渍液
分子式：
CAS号：
性质：是指在以氢氧化钠作催化剂作用下，间苯二酚与甲醛反应得到有一定缩合度的间甲树脂液，然后与胶乳混合，配置成有一定浓度的水溶液，英文缩写为RFL浸渍液。该浸渍液用于帘布、帆布、线绳的浸渍处理工序。采用该浸渍体系获得的黏合强度与RFL浸渍液的组成、配置工艺、浸渍液的用量(或称附胶量)、浸渍热处理工艺条件、胶料配方和硫化条件等有关。
CAS号：
性质：是指在以氢氧化钠作催化剂作用下，间苯二酚与甲醛反应得到有一定缩合度的间甲树脂液，然后与胶乳混合，配置成有一定浓度的水溶液，英文缩写为RFL浸渍液。该浸渍液用于帘布、帆布、线绳的浸渍处理工序。采用该浸渍体系获得的黏合强度与RFL浸渍液的组成、配置工艺、浸渍液的用量(或称附胶量)、浸渍热处理工艺条件、胶料配方和硫化条件等有关。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条