说明：双击或选中下面任意单词，将显示该词的音标、读音、翻译等；选中中文或多个词，将显示翻译。
您的位置：首页 -> 词典 -> 共混乳胶
1)  latex blends
共混乳胶
1.
The morphology of emulsion films,prepared with PMMA-core/PBA-shell latex and latex blends containing both PBA latex and PMMA latex was studied by use of phase image technique of atomic force microscopy(AFM).
利用AFM轻敲模式(tapp ing mode)下的相位成像技术,对PMMA/PBA核壳乳胶及具有相同聚合物组分的共混乳胶成膜后的涂膜形貌进行了比较研究,发现核壳乳胶成膜后,由PMMA组成的硬核呈岛状均匀分布于由PBA组成的软壳融合后形成的连续相中,而对于共混乳胶,由于乳胶粒子间容易发生聚结,其成膜后PMMA乳胶粒子未能均匀分散形成海岛结构。
2)  blend latex
共混胶乳
1.
It was found that the mixing process and stability of blend latex were strongly affected by polymeric polarity and amount of emulsifer in original latex under the present experiment conditions.
对乳液最低成膜温度（ＭＦＴ）、胶膜硬度及耐水性的研究表明：质量比为１１的ＰＢＡ／ＰＭＭＡ共混胶膜和Ｐ（ＢＡ－ＭＭＡ）共聚胶膜的连续相组成相近；而对于同样组成的ＰＢＡ／ＰＳｔ共混胶膜，分散在连续相中的ＰＳｔ所占比例明显高于Ｐ（ＢＡ－Ｓｔ）共聚胶膜；ＰＢＡ／ＰＳｔ共混胶乳的使用性能不仅取决于其组成，还取决于成膜温度和使用温
3)  copolymerization emulsion
共聚乳胶
1.
Studies on new coating of papers as plastic of biodegradation by copolymerization emulsion;
新型可生物降解性共聚乳胶仿塑纸品涂料研究
更多例句>>
4)  emulsion blend
乳液共混
1.
A water-swellable NR(WSNR) was prepared by blending liquid starch-g-polymethyl acrylic acid(SPMAA) directly with NR latex based on emulsion blending method,and the influence of SPMAA and montmorillonite(MMT) on the water absorption and physical properties of WSNR vulcanizate was investigated.
利用乳液共混法将淀粉接枝聚甲基丙烯酸(SPMAA)在液态下直接与天然胶乳共混制备吸水膨胀NR(WSNR),并研究SPMAA和蒙脱土对WSNR硫化胶吸水性能和物理性能的影响。
更多例句>>
5)  Blending emulsion
共混乳液
1.
This paper introduces the polysiloxane/acrylate blending emulsion,copoly-mer emulsion and composite emulsion.
详细介绍了聚硅氧烷/丙烯酸酯共混乳液、共聚乳液及复合乳液。
更多例句>>
6)  blend [英][blend]  [美][blɛnd]
共混胶
1.
Study on Irradiation Modification of Plasticzied PVC/NBR Blend;
增塑PVC/NBR共混胶的辐照改性
2.
The physical-mechanical properties and viscoelastic properties of 20 phr 3,4-IR blends of SBR or NR were studied.
6℃]与SBR或NR质量比为20/80组成的共混胶的力学性能和粘弹性能。
3.
The formula,technology and main properties of EVA/NBR/NR blend in making oil resistant microcellular sole have been introduced.
介绍ＥＶＡ／ＮＢＲ／ＮＲ三元共混胶在耐油环境中使用的微孔鞋底的配方、工艺及主要性能。
更多例句>>
补充资料：共混
分子式：
CAS号：

性质：用炼胶机将不同橡胶或橡胶与塑料，均匀地混炼成胶料即称为共混。两种或多种橡胶并用，或橡胶与各种塑料并用，可大大扩展橡胶制品的用途，并显著提高橡胶制品的质量性能，还可改进胶料的工艺性能，降低橡胶的耗量和降低产品造价。不同橡胶或橡胶与塑料共混时，它们间应具有较好的相容性，或是利用最佳的配比，以有利于最大限度发挥共混的技术效果。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条