1) separation and reattachment
分离再附
1.
Large-eddy simulation (LES) was used to study boundary layer separation and reattachment in the low-pressure turbine (LPT) cascade without considering upstream wakes and at Reynolds numbers(based on chord length and throat exit velocity) of 5×105.
采用三维非稳态N-S方程的大涡模拟方法对典型低压透平叶栅T106不考虑上游尾迹影响的边界层分离、湍流再附等流动现象进行研究,该叶栅基于弦长和喉部速度的雷诺数为5×105,获得的叶栅静压分布、吸力面边界层分离与再附位置与试验数据吻合较好,同时对具有相同雷诺数不同入流角及相同入流角不同雷诺数时吸力面边界层分离再附位置的时空变化、分离泡的尺度以及涡旋非定常动态特性进行了深入研究,得到了2个参数对叶栅边界层分离的影响。
2) separated and reattaching flow
分离再附流
3) flow separation and reattachment
流动分离和再附
4) Separated-and-Reattaching Flow
分离再附流动
5) adsorption separation
吸附分离
1.
Simulated moving bed adsorption separation technology and its applications;
模拟移动床吸附分离技术及其应用
2.
Adsorption separation process for intermediate component preparation and its application;
提取中间组分的吸附分离工艺及应用
3.
A coupled pretreatment technique, ultrasonic and adsorption separation, was investigated for pesticide residues in tea prior to gas chromatography determination.
将超声提取-吸附分离的预处理技术用于气相色谱法检测茶叶中的农药残留。
6) adsorption
[英][æd'sɔ:pʃən] [美][æd'sɔrpʃən]
吸附分离
1.
A dynamic mixing cell model is developed based on analyzing the SMB ( simulated moving bed) adsorption industrial process for separation of C_8 aromatics.
针对C8芳烃模拟移动床吸附分离过程,在严格分析系统机理的基础上,建立了动态混合池模型。
2.
992 mmol(g-1, and the equilibrium adsorption ratio for C2H4/C2H6 is 3.
制备和研究了用于乙烯/乙烷吸附分离的经改性的吸附剂——银离子交换树脂。
3.
The effects of the NaOH concentration, adsorptive temperature,adsorptive time, amount of adsorbent on the adsorption capacity were investigated respectivelyExperimental results showed that the new adsorbent was efficient in NaCl adsorption in highconcentration NaoH solution, and can be regenerated easily The adsorbent displayed goodadsorptive performance after it was used more than ten times.
用自制的新型吸附剂从浓氢氧化钠溶液中吸附分离氯化钠，确定了吸附时间、碱液浓度、吸附剂用量、吸附温度等因素对吸附的影响。
补充资料：分离
分离
①两者解离，如脑脊液检查出蛋白细胞分离现象，见于格林巴利综合征。②隔离的意思，如对传染病患者、恢复期患者和接触者，为防止传染源扩散将其与正常人分离隔绝，避免接触传染。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条