1) attaclling separation
附聚分离
2) adsorption separation
吸附分离
1.
Simulated moving bed adsorption separation technology and its applications;
模拟移动床吸附分离技术及其应用
2.
Adsorption separation process for intermediate component preparation and its application;
提取中间组分的吸附分离工艺及应用
3.
A coupled pretreatment technique, ultrasonic and adsorption separation, was investigated for pesticide residues in tea prior to gas chromatography determination.
将超声提取-吸附分离的预处理技术用于气相色谱法检测茶叶中的农药残留。
3) adsorption
[英][æd'sɔ:pʃən] [美][æd'sɔrpʃən]
吸附分离
1.
A dynamic mixing cell model is developed based on analyzing the SMB ( simulated moving bed) adsorption industrial process for separation of C_8 aromatics.
针对C8芳烃模拟移动床吸附分离过程,在严格分析系统机理的基础上,建立了动态混合池模型。
2.
992 mmol(g-1, and the equilibrium adsorption ratio for C2H4/C2H6 is 3.
制备和研究了用于乙烯/乙烷吸附分离的经改性的吸附剂——银离子交换树脂。
3.
The effects of the NaOH concentration, adsorptive temperature,adsorptive time, amount of adsorbent on the adsorption capacity were investigated respectivelyExperimental results showed that the new adsorbent was efficient in NaCl adsorption in highconcentration NaoH solution, and can be regenerated easily The adsorbent displayed goodadsorptive performance after it was used more than ten times.
用自制的新型吸附剂从浓氢氧化钠溶液中吸附分离氯化钠，确定了吸附时间、碱液浓度、吸附剂用量、吸附温度等因素对吸附的影响。
4) adsorptive separation
吸附分离
1.
Producing dichloromethane and trichloromethane by combined adsorptive separation technology of heat-chlorinating methane;
甲烷热氯化吸附分离组合工艺生产二氯甲烷、三氯甲烷
2.
The application study of mesopore-enriched bamboo activated carbon in methane adsorptive separation and storage;
竹质中孔活性炭甲烷吸附分离及存储性能研究
3.
Recent progress of separation of xylene isomers and ethylbenzene from C_8 aromatic hydrocarbon is expounded with emphasis on technical features of adsorptive separation technologies and their industrial applications.
论述了用于C8芳烃中二甲苯异构体以及乙苯分离的各种吸附分离技术进展,对各种工艺和特点以及工业应用状况进行了分析比较。
5) Adsorption and separation
吸附分离
1.
Methods The static adsorption and separation were used in investigation of macroporous adsorption resin;the dynamic adsorption and separation were used in studying the condition of adsorption and separation.
目的考察11种大孔吸附树脂对肿节风总黄酮的吸附分离性能。
2.
The optimum condition for adsorption and separation process was temperature 220℃,feed space velocity 50 h-1,adsorption/desorption time 25min,and nitrogen gas space velocity 50h-1.
采用吸附分离工艺,以5 A分子筛为吸附剂,氮气为脱附剂,将重整拔头油分离成高纯度的正构烷烃和异构烷烃。
3.
Adsorption and separation technology were studied with reforming topped oil as feedstock and 5A molecular sieve as sorbent in fixed-bed.
2 m,D50 mm)上,研究以5A分子筛为吸附剂,采用吸附分离的工艺技术,对重整拔头油进行吸附分离,考察了温度、空速、吸附/脱附循环等因素对吸附分离工艺的影响,优化了吸附分离的工艺条件。
6) adhesive separation
粘附分离
补充资料：分离式分离机
分子式：
分子量：
CAS号：
性质：又称分离机。根据操作原理分类的一类离心机。用以分离更小固体颗粒（小于5微米）的不同浓度的场合和分离乳浊液和细粒子悬浮液。常用的有管式高速离心机、室式分离机、碟式分离机等。
分子量：
CAS号：
性质：又称分离机。根据操作原理分类的一类离心机。用以分离更小固体颗粒（小于5微米）的不同浓度的场合和分离乳浊液和细粒子悬浮液。常用的有管式高速离心机、室式分离机、碟式分离机等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条