1) EAF slag
EAF渣
1.
In this paper,the microstructural properties of the EAF slag as well as the leaching behavior of the heavy metals in the slag are investigated.
结果表明,EAF渣呈碱性,渣中Fe、Cr和Ni等金属元素主要以金属颗粒、(Cr,Al)2O3和(Fe,Mn,Mg)(Cr,Al)2O4晶体形式存在,具有较高的回收价值;电炉渣中可浸出重金属离子含量未超出国家标准,但存在Cr(III)再氧化为Cr(VI)的可能;Cr(VI)浸出量随浸出时间延长而增加,且Cr(VI)在蒸馏水中的浸出能力较冰醋酸中强。
2) slag from EAF
EAF下渣
3) EAF-CSP process
EAF-CSP流程
1.
Precipitating regulation of Nb(C,N) in Nb microalloyed steel was studied by optical microscope and chemical phase analysis method in EAF-CSP process.
运用光学显微镜、化学相分析等方法研究了EAF-CSP流程铌微合金钢中Nb(C,N)析出规律;并在Gleeble-3500热模拟实验机上实验研究了铌微合金钢的原始奥氏体再结晶规律。
2.
Niobium microalloying technology was used in developing J55 oil casing hot rolling steel strip in EAF-CSP process.
介绍了通过EAF-CSP流程采用Nb微合金化技术开发的J55钢级石油套管用热轧钢带。
3.
The rule of Nb solid solution and precipitate,principles of dissolution-precipitation of second phase particles and austenite grain coarsening by microalloyed with elements Nb and Ti in pipeline steel by EAF-CSP process were studied.
通过研究Nb的固溶、析出规律;EAF-CSP流程对含Nb钢影响;Nb,Ti微合金化的第2相粒子的固溶析出和奥氏体晶粒长大规律;成功开发出Nb,Ti微合金化的管线钢,且消除了含Nb钢的混晶问题,避免了Nb钢的铸坯裂纹,其产品的组织和性能均能满足用户要求。
4) EAF process
EAF流程
5) EAF-LF process for steelmaking
EAF-LF炼钢
6) EAF-LF process
EAF-LF流程
补充资料：[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式：C16H16ClN3O3S
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条