1) EAF-LFV Process
EAF-LFV工艺
2) 150 t EAF-CSP Process
150 t EAF-CSP工艺
3) EAF-LF-VD-WF-CC Process
EAF-LF-VD-WF-CC工艺
1.
Technology of Producing Low Nitrogen Steel by EAF-LF-VD-WF-CC Process;
EAF-LF-VD-WF-CC工艺生产低氮钢技术
4) EAF slag
EAF渣
1.
In this paper,the microstructural properties of the EAF slag as well as the leaching behavior of the heavy metals in the slag are investigated.
结果表明,EAF渣呈碱性,渣中Fe、Cr和Ni等金属元素主要以金属颗粒、(Cr,Al)2O3和(Fe,Mn,Mg)(Cr,Al)2O4晶体形式存在,具有较高的回收价值;电炉渣中可浸出重金属离子含量未超出国家标准,但存在Cr(III)再氧化为Cr(VI)的可能;Cr(VI)浸出量随浸出时间延长而增加,且Cr(VI)在蒸馏水中的浸出能力较冰醋酸中强。
5) EAF-CSP process
EAF-CSP流程
1.
Precipitating regulation of Nb(C,N) in Nb microalloyed steel was studied by optical microscope and chemical phase analysis method in EAF-CSP process.
运用光学显微镜、化学相分析等方法研究了EAF-CSP流程铌微合金钢中Nb(C,N)析出规律;并在Gleeble-3500热模拟实验机上实验研究了铌微合金钢的原始奥氏体再结晶规律。
2.
Niobium microalloying technology was used in developing J55 oil casing hot rolling steel strip in EAF-CSP process.
介绍了通过EAF-CSP流程采用Nb微合金化技术开发的J55钢级石油套管用热轧钢带。
3.
The rule of Nb solid solution and precipitate,principles of dissolution-precipitation of second phase particles and austenite grain coarsening by microalloyed with elements Nb and Ti in pipeline steel by EAF-CSP process were studied.
通过研究Nb的固溶、析出规律;EAF-CSP流程对含Nb钢影响;Nb,Ti微合金化的第2相粒子的固溶析出和奥氏体晶粒长大规律;成功开发出Nb,Ti微合金化的管线钢,且消除了含Nb钢的混晶问题,避免了Nb钢的铸坯裂纹,其产品的组织和性能均能满足用户要求。
6) EAF process
EAF流程
补充资料：采气工艺(见天然气开采工艺)
采气工艺(见天然气开采工艺)
gas production technology
，一‘J\匕乙吕天然气开采工艺pro以uetionteehnology)见
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条